Difficulty
Moderate
Steps
11
Time Required
Suggest a time??
Sections
1
- Light Element
- 11 steps
Flags
0
BackTatung TAC-6G
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Light Element
- Start with the device standing upright.
Start with the device standing upright.
1024
Step 2
- Remove the 11mm Phillips screw from below the power component panel.
Remove the 11mm Phillips screw from below the power component panel.
Step 3
- Pull the panel away from the rice cooker.
- Remove the 9mm Phillips screw from behind the power component dashboard that is connected to the light plate.
Pull the panel away from the rice cooker.
Remove the 9mm Phillips screw from behind the power component dashboard that is connected to the light plate.
Step 4
- Pull the light plate from the power component panel.
Pull the light plate from the power component panel.
Step 5
- Flip the rice cooker device upside down.
Flip the rice cooker device upside down.
Step 6
- Remove the one 7mm Phillips screw from the side of the brass panel
- Lift the brass plate off of the device and set it aside.
Remove the one 7mm Phillips screw from the side of the brass panel
Lift the brass plate off of the device and set it aside.
Step 7
- Remove the 7mm Phillips screw holding the white and maroon colored wires that are connected to the heating element.
Remove the 7mm Phillips screw holding the white and maroon colored wires that are connected to the heating element.
Step 8
- Remove the 10mm Phillips screw that connects the white, blue and black wires to the white plastic piece in the corner of the device.
Remove the 10mm Phillips screw that connects the white, blue and black wires to the white plastic piece in the corner of the device.
Step 9
- Remove the 7mm Phillips screw that connects two white wires and one red wire to the heating “warm” switch.
Remove the 7mm Phillips screw that connects two white wires and one red wire to the heating “warm” switch.
Step 10
- Using your hand, pull out the light plate with the maroon red and black wires.
Using your hand, pull out the light plate with the maroon red and black wires.
Step 11
- Replace the light plate dashboard.
Replace the light plate dashboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Erin Charles
Member since: 01/28/2016
215 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
University of Alabama, Team 1-6, Sydow campbell Spring 2016
Member of University of Alabama, Team 1-6, Sydow campbell Spring 2016
UA-SYDOW CAMPBELL-S16S1G6
4 Members
3 Guides authored
Tom Anderson - Oct 26, 2022
Reply
Reverse the steps for reassembly.