Difficulty
Moderate
Steps
4
Time Required
5 minutes
Sections
2
- Back Cover
- 2 steps
- Battery
- 2 steps
Flags
Confusing Text
Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!
Needs More Images
A few more images would make this guide’s procedures crystal clear.
BackTapwave T2907US Zodiac 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Remove the four Torx T5 screws from the back panel.
Remove the four Torx T5 screws from the back panel.
1024
Step 2
- Wedge a spudger in between the front and back panel.
- Apply leverage downwards to the spudger in order to remove the back panel.
Wedge a spudger in between the front and back panel.
Apply leverage downwards to the spudger in order to remove the back panel.
Step 3
Battery
- Slide the battery out from under the brown wire-tape.
- Be careful of the wires still connected to the other end of the battery. Do not pull or damage may occur.
Slide the battery out from under the brown wire-tape.
Be careful of the wires still connected to the other end of the battery. Do not pull or damage may occur.
Step 4
- Slowly pull the white plug from its receptor. Grasp its sides firmly with a pair of tweezers and gently wiggle from side to side.
Slowly pull the white plug from its receptor. Grasp its sides firmly with a pair of tweezers and gently wiggle from side to side.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 6 other contributors
Daniel Wiseman
Member since: 01/20/2012
133 Reputation
6 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 10-33, Amido Winter 2012
Member of Cal Poly, Team 10-33, Amido Winter 2012
CPSU-AMIDO-W12S10G33
4 Members
10 Guides authored