Difficulty
Difficult
Steps
7
Time Required
40 minutes
Sections
3
- Back Cover
- 2 steps
- Battery
- 1 step
- Screen
- 4 steps
Flags
1
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
BackTagital T9X
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- With the tablet turned off, remove the two 5mm Phillips head screws from the top of the tablet.
- These screws are extremely easy to lose. Be sure to store them in a safe place.
With the tablet turned off, remove the two 5mm Phillips head screws from the top of the tablet.
These screws are extremely easy to lose. Be sure to store them in a safe place.
1024
Step 2
- Use a 1 cm wide plastic opening tool to remove the back panel. Go around the entire back panel to ensure safe removal.
- The power, return, and volume buttons are not firmly secured to the panel; it is likely they will fall off in the process of removing the panel.
Use a 1 cm wide plastic opening tool to remove the back panel. Go around the entire back panel to ensure safe removal.
The power, return, and volume buttons are not firmly secured to the panel; it is likely they will fall off in the process of removing the panel.
Step 3
Battery
- Using a plastic spudger, carefully pry the battery from its position. Ensure that you do not puncture or bend the battery in this process.
- The only wires for removal are the red and black wires that are soldered into the battery and motherboard.
Using a plastic spudger, carefully pry the battery from its position. Ensure that you do not puncture or bend the battery in this process.
The only wires for removal are the red and black wires that are soldered into the battery and motherboard.
Step 4
Screen
- Remove the four 2mm Phillips head screws from the motherboard.
Remove the four 2mm Phillips head screws from the motherboard.
Step 5
- Locate the 2 ZIF connectors.
- Remove both ZIF connectors by lifting the flap on the connectors and carefully removing the ribbons.
Locate the 2 ZIF connectors.
Remove both ZIF connectors by lifting the flap on the connectors and carefully removing the ribbons.
Step 6
- Remove the motherboard and battery from the back of the screen.
Remove the motherboard and battery from the back of the screen.
Step 7
- Using the spudger, pry the screen from its housing.
- The display screen is secured by small plastic pieces that snap over the edges. It may be easier to start from the corner of the display screen to detach it from the touchscreen.
Using the spudger, pry the screen from its housing.
The display screen is secured by small plastic pieces that snap over the edges. It may be easier to start from the corner of the display screen to detach it from the touchscreen.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Christopher M Shultz
Member since: 01/29/2016
208 Reputation
2 Guides authored
Badges:
11
+8 more badges
Team
University of Kentucky Louisville, Team 1-1, Matravers Spring 2016
Member of University of Kentucky Louisville, Team 1-1, Matravers Spring 2016
LOUISVILLE-MATRAVERS-S16S1G1
4 Members
12 Guides authored
