Difficulty
Easy
Steps
4
Time Required
5 - 15 minutes
Sections
2
- Case
- 1 step
- Camera
- 3 steps
Flags
0
BackTagital T7X
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Case
- Place the Tagital T7X on a sturdy surface.
- Insert the plastic opening tool into the crack and pry open the tablet. Move the tool along the edge, while continuing to pry up the casing.
Place the Tagital T7X on a sturdy surface.
Insert the plastic opening tool into the crack and pry open the tablet. Move the tool along the edge, while continuing to pry up the casing.
1024
Step 2
Camera
- Use a spudger to hold the cameras in place.
- Gently pull the black tape away using your finger.
Use a spudger to hold the cameras in place.
Gently pull the black tape away using your finger.
Step 3
- Remove the ribbon cable from the motherboard.
- Use a spudger to lift the two tabs, freeing the ribbon cable from the socket.
Remove the ribbon cable from the motherboard.
Use a spudger to lift the two tabs, freeing the ribbon cable from the socket.
Step 4
- Gently pull the ribbon cable away from the motherboard.
- Don’t be afraid to use some force to pull the ribbon cable.
Gently pull the ribbon cable away from the motherboard.
Don’t be afraid to use some force to pull the ribbon cable.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Hanlong Chen
Member since: 02/10/2016
265 Reputation
2 Guides authored
Badges:
6
+3 more badges
Team
USF Tampa, Team 2-1, Sullivan Spring 2016
Member of USF Tampa, Team 2-1, Sullivan Spring 2016
USFT-SULLIVAN-S16S2G1
4 Members
12 Guides authored
