Tagital T10 Touch Screen Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          30 minutes - 1 hour

Sections

Touch Screen
9 steps

Flags

BackTagital T10
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Touch Screen

Always make sure your device is completely powered off before performing repairs
Remove the two 4mm screws at the top of the device.
Set these aside and be careful not to lose them, as well as all other screws that you remove.

Always make sure your device is completely powered off before performing repairs

Remove the two 4mm screws at the top of the device.

Set these aside and be careful not to lose them, as well as all other screws that you remove.

1024

Step 2

Carefully remove the back cover by using a plastic prying tool, moving all the way around the perimeter of the tablet.
Set the back cover aside
The speakers are attached to the inside back cover, and are connected by wires to the motherboard of the tablet. Carefully set the back cover aside so that you do not rip the wires free.

Carefully remove the back cover by using a plastic prying tool, moving all the way around the perimeter of the tablet.

Set the back cover aside

The speakers are attached to the inside back cover, and are connected by wires to the motherboard of the tablet. Carefully set the back cover aside so that you do not rip the wires free.

Step 3

The display screen is the silver box that the battery and motherboard sit on. It sits snugly against the underside of the touch screen.
Remove all of the 4mm screws that attach the display screen to the back of the touch screen with brackets.

The display screen is the silver box that the battery and motherboard sit on. It sits snugly against the underside of the touch screen.

Remove all of the 4mm screws that attach the display screen to the back of the touch screen with brackets.

Step 4

Remove all of the 4mm screws that attach the motherboard to the rest of the device.
One screw is located beneath the black tape that holds the rear-facing camera in place. Peel the tape up to access it.

Remove all of the 4mm screws that attach the motherboard to the rest of the device.

One screw is located beneath the black tape that holds the rear-facing camera in place. Peel the tape up to access it.

Step 5

Locate the 2 ZIF connectors.
Flip up the black tab to release the two filaments, so that they are no longer connected to the motherboard.

Locate the 2 ZIF connectors.

Flip up the black tab to release the two filaments, so that they are no longer connected to the motherboard.

Step 6

Locate the notification light on the upper left corner of the device.
Gently pull on the wires to remove the light from its housing.

Locate the notification light on the upper left corner of the device.

Gently pull on the wires to remove the light from its housing.

Step 7

Remove the motherboard from the back of the display screen.
Some wires are still attached to the device so carefully set it to the side

Remove the motherboard from the back of the display screen.

Some wires are still attached to the device so carefully set it to the side

Step 8

Begin lifting the display screen out of its housing with a plastic prying tool, sliding it around the perimeter of the screen.
It may be helpful to use two prying tools at the same time.

Begin lifting the display screen out of its housing with a plastic prying tool, sliding it around the perimeter of the screen.

It may be helpful to use two prying tools at the same time.

Step 9

Completely remove the display screen from the touchscreen.

Completely remove the display screen from the touchscreen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors

                    Jessalyn Aretz

Member since: 09/26/2016

212 Reputation

                                      1 Guide authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       USF Tampa, Team 14-5, Eyestone Fall 2016                        

                                                  Member of USF Tampa, Team 14-5, Eyestone Fall 2016 



                    USFT-EYESTONE-F16S14G5                     


                                            4 Members                     


                                            10 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team