Difficulty
Moderate
Steps
8
Time Required
Suggest a time??
Sections
1
- Power button
- 8 steps
Flags
0
BackTagital T10
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Power button
- Always make sure your device is completely powered off before performing repairs.
- Remove the two 4 mm Phillips head screws at the top of the tablet.
Always make sure your device is completely powered off before performing repairs.
Remove the two 4 mm Phillips head screws at the top of the tablet.
1024
Step 2
- Carefully remove the back cover by using a plastic opening tool, moving all the way around the perimeter of the tablet.
- Set the back cover aside.
- The speakers are attached to the inside back cover, and are connected by wires to the motherboard of the tablet. Carefully set the back cover aside so that you do not rip the wires free.
Carefully remove the back cover by using a plastic opening tool, moving all the way around the perimeter of the tablet.
Set the back cover aside.
The speakers are attached to the inside back cover, and are connected by wires to the motherboard of the tablet. Carefully set the back cover aside so that you do not rip the wires free.
Step 3
- Remove all of the 4mm screws that attach the display screen to the back of the touch screen with brackets.
- There should be a total of 8 screws and at size PH000.
Remove all of the 4mm screws that attach the display screen to the back of the touch screen with brackets.
There should be a total of 8 screws and at size PH000.
Step 4
- Remove all of the 4mm screws that attach the motherboard to the rest of the device.
- One screw is located beneath the black tape that holds the rear-facing camera in place. Peel the tape up to access it.
- There should be a total of 7 screws at size PH000.
Remove all of the 4mm screws that attach the motherboard to the rest of the device.
One screw is located beneath the black tape that holds the rear-facing camera in place. Peel the tape up to access it.
There should be a total of 7 screws at size PH000.
Step 5
- Locate the 2 ZIF connectors.
- Flip up the black tab to release the two filaments, so that they are no longer connected to the motherboard.
Locate the 2 ZIF connectors.
Flip up the black tab to release the two filaments, so that they are no longer connected to the motherboard.
Step 6
- Locate the notification light on the upper corner of the device.
- Gently pull on the wires to remove the light from it’s housing.
Locate the notification light on the upper corner of the device.
Gently pull on the wires to remove the light from it’s housing.
Step 7
- Remove the motherboard from the back of the display screen.
- Some wires are still attached to the device, so carefully set it to the side.
Remove the motherboard from the back of the display screen.
Some wires are still attached to the device, so carefully set it to the side.
Step 8
- Push the power button towards the interior of the device to free it from its slot, using tweezers.
Push the power button towards the interior of the device to free it from its slot, using tweezers.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 4 other contributors
Destin Dawsy
Member since: 09/26/2016
328 Reputation
2 Guides authored
Badges:
10
+7 more badges
Team
USF Tampa, Team 14-5, Eyestone Fall 2016
Member of USF Tampa, Team 14-5, Eyestone Fall 2016
USFT-EYESTONE-F16S14G5
4 Members
10 Guides authored
