Difficulty
Moderate
Steps
10
Time Required
1 - 4 minutes
Sections
1
- Touch Screen
- 10 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackAndroid Tablet
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Touch Screen
- We must use a plastic guitar pick or in the case that you do not have one, a plastic card can do us helpful (credit card)
We must use a plastic guitar pick or in the case that you do not have one, a plastic card can do us helpful (credit card)
1024
Step 2
- Slowly, insert the pick pressing it and swinging it along the perimeter of the tablet’s body
Slowly, insert the pick pressing it and swinging it along the perimeter of the tablet’s body
Step 3
- Carefully loosen with your fingers the back and place the tablet face down on a flat and clean surface tablet
Carefully loosen with your fingers the back and place the tablet face down on a flat and clean surface tablet
Step 4
- the speaker is screwed next to the touch chassis, we must release the screw and place it in a visible place, the speaker will remain with adhesive tape next to the battery
the speaker is screwed next to the touch chassis, we must release the screw and place it in a visible place, the speaker will remain with adhesive tape next to the battery
Step 5
- With the help of the pua or the fingers, we must release the data FLEX from the connection, making a small upward pressure
With the help of the pua or the fingers, we must release the data FLEX from the connection, making a small upward pressure
Step 6
- Careful! The FLEX cable that joins the front and rear camera, will be completely loose, we must place it in a clean place for later assembly.
Careful! The FLEX cable that joins the front and rear camera, will be completely loose, we must place it in a clean place for later assembly.
Step 7
- we will have a third FLEX on the motherboard, we must do the same method to press up on the connector until it is released, carefully these FLEX are easy to break.
we will have a third FLEX on the motherboard, we must do the same method to press up on the connector until it is released, carefully these FLEX are easy to break.
Step 8
- now with the help of a Phillips screwdriver, we must release the three screws that hold the base plate of the touch screen chassis, and the sensor with positive and negative cables, we can help with the fingers in a smooth way.
now with the help of a Phillips screwdriver, we must release the three screws that hold the base plate of the touch screen chassis, and the sensor with positive and negative cables, we can help with the fingers in a smooth way.
Step 9
- carefully, we already have the loose base plate of the touch chassis, we look at the various grips that connect the touch screen with the LCD and with the tine and small balancing we are doing pressure to separate touch and LCD screen.
carefully, we already have the loose base plate of the touch chassis, we look at the various grips that connect the touch screen with the LCD and with the tine and small balancing we are doing pressure to separate touch and LCD screen.
Step 10
- Following these steps we have loosen our LCD screen and the carcass of the touch screen, now we must look for the reference number that appears on the FLEX cable of the touch screen so we can order a new one
Following these steps we have loosen our LCD screen and the carcass of the touch screen, now we must look for the reference number that appears on the FLEX cable of the touch screen so we can order a new one
In order to reassemble your device, follow these instructions in reverse order
Cancel: I did not complete this guide.
14 other people completed this guide.
These translators are helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
irlanda
carlos
George Youssef
Luis B
and 1 other…
+1
Author
with 2 other contributors
Fran Ruiz
Member since: 11/14/2015
488 Reputation
1 Guide authored
Badges:
9
+6 more badges
Jan - Feb 8, 2022
Reply
No mention of the adhesive needed to reattach the screen.
jorge alejandro - May 17, 2022
Reply
garcias por la ayuda