T Mobile Huawei Prism U8651T Digitizer Replacement Repair Guide

Difficulty

Moderate

Steps

12

Time Required

                          10 minutes            

Sections

2

• LCD
• 11 steps
• Digitizer
• 1 step

Flags

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

• BackT-Mobile Huawei Prism U8651T

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Remove Back Cover Panel               

• Place the phone face down.
• Slide the back cover panel away from you, until you hear a click.
• Lift the back cover panel off.

Place the phone face down.

Slide the back cover panel away from you, until you hear a click.

Lift the back cover panel off.

1024

Step 2

              Remove Battery               

• Place the plastic opening tool in the gap between the camera and battery.
• Pry the battery up.
• Remove the battery.

Place the plastic opening tool in the gap between the camera and battery.

Pry the battery up.

Remove the battery.

Step 3

              Torx Screws               

• Locate the six 3mm torx screws holding the plastic mid frame in place.
• Remove the six torx screws with the T4 torx screwdriver.

Locate the six 3mm torx screws holding the plastic mid frame in place.

Remove the six torx screws with the T4 torx screwdriver.

Step 4

              Remove Plastic Mid Frame               

• Place the plastic opening tool in the charging port.
• Pry up to loosen the bottom edge of the plastic mid frame.
• Work the plastic opening tool along the seam, until the the plastic mid frame is detached.
• Remove the plastic mid frame.

Place the plastic opening tool in the charging port.

Pry up to loosen the bottom edge of the plastic mid frame.

Work the plastic opening tool along the seam, until the the plastic mid frame is detached.

Remove the plastic mid frame.

Step 5

              Remove Power and Volume Buttons               

• Locate the power button.
• Locate the volume botton.
• Slide the two buttons up and out of the phone.
• The removed buttons are incredibly easy to lose, so be sure to keep an eye on them.

Locate the power button.

Locate the volume botton.

Slide the two buttons up and out of the phone.

The removed buttons are incredibly easy to lose, so be sure to keep an eye on them.

Step 6

              Remove Power Button Sensor Strip               

• Locate the power button sensor strip.
• Place the plastic opening tool under the sensor strip.
• Pry the sensor strip up.

Locate the power button sensor strip.

Place the plastic opening tool under the sensor strip.

Pry the sensor strip up.

Step 7

              Remove Volume Button Sensor Strip               

• Locate the volume button sensor strip.
• Place the plastic opening tool under the sensor strip.
• Pry the sensor strip up.

Locate the volume button sensor strip.

Step 8

              Remove Outer Screen Connector               

• Locate the outer screen connector.
• Place the plastic opening tool under the screen connector.
• Pry the screen connector up.

Locate the outer screen connector.

Place the plastic opening tool under the screen connector.

Pry the screen connector up.

Step 9

              Remove Inner Screen Connector               

• Locate the inner screen connector.
• Place the plastic opening tool under the screen connector.
• Pry the screen connector up.

Locate the inner screen connector.

Step 10

              Remove Motherboard               

• Place the plastic opening tool in the charger port.
• Pry the motherboard up.
• Remove the motherboard.

Place the plastic opening tool in the charger port.

Pry the motherboard up.

Remove the motherboard.

Step 11

              Remove Screen               

• Pick up the front half of your phone with your left hand.
• Slowly rotate the phone so the screen falls into your right hand.
• Be extremely careful not to drop the screen.

Pick up the front half of your phone with your left hand.

Slowly rotate the phone so the screen falls into your right hand.

Be extremely careful not to drop the screen.

Step 12

              Digitizer               

• Be sure to use the new digitizer when reassembling your phone.

Be sure to use the new digitizer when reassembling your phone.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Dillon                     

Member since: 10/23/2014

578 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       Michigan Tech, Team 1-7, Lauer Fall 2014                        

                                                  Member of Michigan Tech, Team 1-7, Lauer Fall 2014 



                    MTU-LAUER-F14S1G7                     


                                            3 Members                     


                                            10 Guides authored