Difficulty

Moderate

Steps

5

Time Required

                          3 - 7 minutes

Sections

2

  • Back cover
  • 3 steps
  • Screen
  • 2 steps

Flags

3

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackSylvania SDVD9004

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back cover
  • Remove ten 7mm Phillips #0 screws.
  • Remove four 5mm Phillips #0 screws.

Remove ten 7mm Phillips #0 screws.

Remove four 5mm Phillips #0 screws.

1024

Step 2

  • Flip the device over.
  • Lift the top.

Flip the device over.

Lift the top.

Step 3

  • This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete this step.

This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete this step.

Step 4

              Screen
  • Disconnect ribbon
  • This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete this step.
  • Rotate screwdriver to peel sticker from ribbon.
  • Place spudger head behind gray tabs on port.
  • Press outward to disengage tab.
  • Repeat on other side.
  • Slide out ribbon.

Disconnect ribbon

Rotate screwdriver to peel sticker from ribbon.

Place spudger head behind gray tabs on port.

Press outward to disengage tab.

Repeat on other side.

Slide out ribbon.

Step 5

  • Using Philips head screwdriver, remove the two 7 mm screws.
  • Slide off top panel.

Using Philips head screwdriver, remove the two 7 mm screws.

Slide off top panel.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Sarah Henry

Member since: 10/31/2016

417 Reputation

                                      4 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Baylor, Team 5-10, Williams Fall 2016                        

                                                  Member of Baylor, Team 5-10, Williams Fall 2016 



                    BU-WILLIAMS-F16S5G10                     


                                            2 Members                     


                                            5 Guides authored