Difficulty
Moderate
Steps
3
Time Required
1 - 3 minutes
Sections
1
- Case
- 3 steps
Flags
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackSwann Wi-Fi Indoor Security Camera
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Case
- Use the Phillips #0 to remove the screw located on the back of the camera above the mount.
- Slide the mount out from the bottom of the device.
Use the Phillips #0 to remove the screw located on the back of the camera above the mount.
Slide the mount out from the bottom of the device.
1024
Step 2
- Remove the back of the case by placing a iFixit opening tool underneath the edge of the case and prying it up.
Remove the back of the case by placing a iFixit opening tool underneath the edge of the case and prying it up.
Step 3
- Carefully remove the back of the case without pulling the cables connected to the motherboard and the speaker on the back of the case.
Carefully remove the back of the case without pulling the cables connected to the motherboard and the speaker on the back of the case.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Logan Sluder
Member since: 09/18/2019
544 Reputation
6 Guides authored
Badges:
5
+2 more badges
Team
Western Carolina University, Team S1-G4, Virtue Fall 2019
Member of Western Carolina University, Team S1-G4, Virtue Fall 2019
WCU-VIRTUE-F19S1G4
4 Members
12 Guides authored