Swann Wi Fi Indoor Security Camera Camera Lens Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          5 minutes            

Sections

2

• Case
• 3 steps
• Camera Lens
• 2 steps

Flags

1

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

• BackSwann Wi-Fi Indoor Security Camera

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Case               

• Use the Phillips #0 to remove the screw located on the back of the camera above the mount.
• Slide the mount out from the bottom of the device.

Use the Phillips #0 to remove the screw located on the back of the camera above the mount.

Slide the mount out from the bottom of the device.

1024

Step 2

• Remove the back of the case by placing a iFixit opening tool underneath the edge of the case and prying it up.

Remove the back of the case by placing a iFixit opening tool underneath the edge of the case and prying it up.

Step 3

• Carefully remove the back of the case without pulling the cables connected to the motherboard and the speaker on the back of the case.

Carefully remove the back of the case without pulling the cables connected to the motherboard and the speaker on the back of the case.

Step 4

              Camera Lens               

• Facing the front of the camera, remove the four 2.0 mm Phillips #0 black screws that hold the back of the motherboard to the case.
• Release the four camera cable connections on the motherboard.

Facing the front of the camera, remove the four 2.0 mm Phillips #0 black screws that hold the back of the motherboard to the case.

Release the four camera cable connections on the motherboard.

Step 5

• Facing the back of the motherboard, remove the two 2.0 mm Phillips #0 screws connecting the camera to the motherboard.

Facing the back of the motherboard, remove the two 2.0 mm Phillips #0 screws connecting the camera to the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Logan Sluder                     

Member since: 09/18/2019

544 Reputation

                                      6 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Western Carolina University, Team S1-G4, Virtue Fall 2019                        

                                                  Member of Western Carolina University, Team S1-G4, Virtue Fall 2019 



                    WCU-VIRTUE-F19S1G4                     


                                            4 Members                     


                                            12 Guides authored                     

Sonny Jobe - Nov 27, 2022

Reply

is there a place i can buy a replacement lens for my swann security camera please sn 10050062001244