Swann Doorphone Video Intercom Wire Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 minutes

Sections

Wire
4 steps

Flags

BackSwann Doorphone Video Intercom
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Wire

Flip the monitor of the Swann Doorphone over so that the underside is facing up.
Grip the sides of the black rectangular frame where they extend outwards and pull down.
After pulling down, pull the frame towards you to remove it from the monitor.

Flip the monitor of the Swann Doorphone over so that the underside is facing up.

Grip the sides of the black rectangular frame where they extend outwards and pull down.

After pulling down, pull the frame towards you to remove it from the monitor.

1024

Step 2

Using the JIS #0 screwdriver, unscrew the 2 mm screw in terminal 1 with the blue wire underneath.
Pull the blue wire out from beneath the metal plate.
Be careful when removing the screw from terminal 1, the metal plate behind the screw is not connected and may fall off.

Using the JIS #0 screwdriver, unscrew the 2 mm screw in terminal 1 with the blue wire underneath.

Pull the blue wire out from beneath the metal plate.

Be careful when removing the screw from terminal 1, the metal plate behind the screw is not connected and may fall off.

Step 3

Flip the outdoor camera over so that the underside is facing up.
Remove the back cover by grabbing the sides of the camera and pulling towards your body.

Flip the outdoor camera over so that the underside is facing up.

Remove the back cover by grabbing the sides of the camera and pulling towards your body.

Step 4

With the back cover of the outdoor camera off, press the first gray square button with blue wire down.
While pressing the gray square button, remove the blue wire from the first opening under the button.
Be sure to remove the same color wire for the outdoor camera as was used for the indoor video intercom.
In this guide, we are using the blue wire in terminal 1 for the audio. As a recommendation; * Use the blue wire in terminal 1 for the audio wire. * Use the brown wire in terminal 2 for the ground wire. * Use the green wire in terminal 3 for the video wire. * Use the black wire in terminal 4 for the power wire.

With the back cover of the outdoor camera off, press the first gray square button with blue wire down.

While pressing the gray square button, remove the blue wire from the first opening under the button.

Be sure to remove the same color wire for the outdoor camera as was used for the indoor video intercom.

In this guide, we are using the blue wire in terminal 1 for the audio. As a recommendation; * Use the blue wire in terminal 1 for the audio wire. * Use the brown wire in terminal 2 for the ground wire. * Use the green wire in terminal 3 for the video wire. * Use the black wire in terminal 4 for the power wire.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor

                    Emily Stenke

Member since: 02/14/2018

555 Reputation

                                      4 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       USF Tampa, Team S2-G4, Eyestone Spring 2018                        

                                                  Member of USF Tampa, Team S2-G4, Eyestone Spring 2018 



                    USFT-EYESTONE-S18S2G4                     


                                            4 Members                     


                                            5 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team