Difficulty
Moderate
Steps
6
Time Required
10 minutes
Sections
1
- Camera
- 6 steps
Flags
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
BackSwann Doorphone Video Intercom
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Camera
- Flip the outdoor camera over so that the underside is facing up.
- Remove the back cover by grabbing the sides of the camera and pulling towards your body.
Flip the outdoor camera over so that the underside is facing up.
Remove the back cover by grabbing the sides of the camera and pulling towards your body.
1024
Step 2
- With the back cover of the outdoor camera off, press the first gray button, with blue wire underneath, down as shown in the picture.
- While pressing the gray square button, remove the blue wire from the first opening under the button.
- Be sure to remove the same color wire for the outdoor camera as was used for the indoor video intercom.
With the back cover of the outdoor camera off, press the first gray button, with blue wire underneath, down as shown in the picture.
While pressing the gray square button, remove the blue wire from the first opening under the button.
Be sure to remove the same color wire for the outdoor camera as was used for the indoor video intercom.
Step 3
- Remove the other wires using the same steps as the blue wire.
- Using the JIS #0 screwdriver, remove the 2mm screws from the back plate.
- Remove the back plate by pulling the plate away from the device.
Remove the other wires using the same steps as the blue wire.
Using the JIS #0 screwdriver, remove the 2mm screws from the back plate.
Remove the back plate by pulling the plate away from the device.
Step 4
- Using the JIS #0 screwdriver, remove the 1mm screws from behind the camera.
Using the JIS #0 screwdriver, remove the 1mm screws from behind the camera.
Step 5
- Using one of the tweezers from the Precision Tweezers Set, gently place them around the wire connector attached to the camera.
- Pull slowly in the direction of the cables until the connector is no longer attached.
Using one of the tweezers from the Precision Tweezers Set, gently place them around the wire connector attached to the camera.
Pull slowly in the direction of the cables until the connector is no longer attached.
Step 6
- Remove the camera from the device.
Remove the camera from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Emily Stenke
Member since: 02/14/2018
555 Reputation
4 Guides authored
Badges:
10
+7 more badges
Team
USF Tampa, Team S2-G4, Eyestone Spring 2018
Member of USF Tampa, Team S2-G4, Eyestone Spring 2018
USFT-EYESTONE-S18S2G4
4 Members
5 Guides authored
Mahdi Arab - Dec 8, 2021
Reply
https://www.leso.ir/automatic-gate-opene…
آیفون تصویری
https://www.leso.ir/Video-Door-Phone-Sys…
مانیتور آیفون تصویری حافظه دار
https://www.roham-tech.ir/Video-Door-Pho…
cctvgram - Aug 15, 2022
Reply
فروشگاه دوربین مداربسته
cctvgram - Aug 16, 2022
Reply
چاپ بنر تسلیت