Difficulty

Easy

Steps

6

Time Required

                          15 - 25 minutes

Sections

2

  • Back Panels
  • 3 steps
  • Outer Shell
  • 3 steps

Flags

0

  • BackSwagTron T1

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panels
  • Ensure that the SwagTron is off.
  • Turn the SwagTron upside down to see the underside.

Ensure that the SwagTron is off.

Turn the SwagTron upside down to see the underside.

1024

Step 2

  • Unscrew the eighteen 10mm screws that secure the back panels using a Phillips #2 screwdriver.
  • The screws are tightly in place. It will take effort to screw them out.
  • The panel is still attached to the SwagTron by wires that go to the motherboard.
  • Carefully lift the panels off

Unscrew the eighteen 10mm screws that secure the back panels using a Phillips #2 screwdriver.

The screws are tightly in place. It will take effort to screw them out.

The panel is still attached to the SwagTron by wires that go to the motherboard.

Carefully lift the panels off

Step 3

  • Follow the wires from the panels to the motherboard.
  • You may need to cut any zip ties that are holding the wires together.
  • There is one connection on the battery side and three on the other side that must be removed.
  • These connections may be difficult to remove. Try to securely press the connection and pull firmly.
  • Your back panels are now completely removed.

Follow the wires from the panels to the motherboard.

You may need to cut any zip ties that are holding the wires together.

There is one connection on the battery side and three on the other side that must be removed.

These connections may be difficult to remove. Try to securely press the connection and pull firmly.

Your back panels are now completely removed.

Step 4

              Outer Shell
  • Unscrew the twelve 10mm screws that connect the metal chassis to the top plastic panel.
  • These screws will be low into the SwagTron.

Unscrew the twelve 10mm screws that connect the metal chassis to the top plastic panel.

These screws will be low into the SwagTron.

Step 5

  • Turn the SwagTron right side up and slightly lift up the panel.
  • Be careful to not pull too hard because the panel is still attached to the SwagTron by wires.

Turn the SwagTron right side up and slightly lift up the panel.

Be careful to not pull too hard because the panel is still attached to the SwagTron by wires.

Step 6

  • Turn the SwagTron over and disconnect the wires from the motherboard.
  • Follow the wires to the underside of the SwagTron.
  • Carefully remove the cord and the panel together.
  • All the panels are now free from the SwagTron.

Turn the SwagTron over and disconnect the wires from the motherboard.

Follow the wires to the underside of the SwagTron.

Carefully remove the cord and the panel together.

All the panels are now free from the SwagTron.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Gloria Whang

Member since: 04/13/2017

173 Reputation

                                      1 Guide authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team S17-G5, Banghart Spring 2017                        

                                                  Member of Cal Poly, Team S17-G5, Banghart Spring 2017 



                    CPSU-BANGHART-S17S17G5                     


                                            4 Members                     


                                            5 Guides authored

Syd Jensen - Jan 3, 2018

Reply

Where did you ind a replacement shell for the Swagtron T1? I need to buy a new one, but can’t seem to find a place to buy it online.

Where can I buy a Swagtron T1 replacement shell?

Craig - Feb 27, 2018

Syd any luck finding a replacement shell?  I need to order the same kind and cannot find it online.

Jesse Griffis - Jul 23, 2018