Svp 5800 Front Casing Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          3 minutes

Sections

Strap Hook
1 step
Front Casing
3 steps

Flags

BackSVP Aqua 5800
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Strap Hook

Locate the two 3.5 mm screws on the side of the device.
Apply pressure to the PH J000 philips head screwdriver and turn in a counter clockwise motion until the screw becomes loose enough to pull out.

Locate the two 3.5 mm screws on the side of the device.

Apply pressure to the PH J000 philips head screwdriver and turn in a counter clockwise motion until the screw becomes loose enough to pull out.

1024

Step 2

              Front Casing

Once you have properly removed the strap hook, locate the two 3 mm screws located on the opposite side of the strap hook.
Refer to the prerequisite guide on removing the strap hook for instructions.
Place the PH J000 phillips head screwdriver on the head of screw; apply pressure and turn in a counter clockwise motion until screws come loose.

Once you have properly removed the strap hook, locate the two 3 mm screws located on the opposite side of the strap hook.

Refer to the prerequisite guide on removing the strap hook for instructions.

Place the PH J000 phillips head screwdriver on the head of screw; apply pressure and turn in a counter clockwise motion until screws come loose.

Step 3

Place the plastic opening tool on the crack between the front and back casings.
Apply pressure by pulling down on the plastic opening tool to pry the case apart.

Place the plastic opening tool on the crack between the front and back casings.

Apply pressure by pulling down on the plastic opening tool to pry the case apart.

Step 4

Wedge your fingers in the opening and slowly pull the front casing away from the bottom casing until it complete separates from the device.
Using too much force in this step can damage your device.

Wedge your fingers in the opening and slowly pull the front casing away from the bottom casing until it complete separates from the device.

Using too much force in this step can damage your device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    Cheyenne Heinen

Member since: 03/07/2016

337 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Marist, Team 1-3, Laflen Spring 2016                        

                                                  Member of Marist, Team 1-3, Laflen Spring 2016 



                    MARS-LAFLEN-S16S1G3                     


                                            2 Members                     


                                            5 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team