Difficulty
Moderate
Steps
3
Time Required
5 minutes
Sections
1
- Touchscreen Sensor
- 3 steps
Flags
Missing Prerequisites
This guide is missing information on how to start the process. Make a prerequisite guide!
BackSupersonic SC-777BT
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Touchscreen Sensor
- Pull the yellow ribbon cable to dislodge the screen from the plastic screen cover.
Pull the yellow ribbon cable to dislodge the screen from the plastic screen cover.
1024
Step 2
- Tear the yellow tape in order to make the front and back covers free to disassemble.
Tear the yellow tape in order to make the front and back covers free to disassemble.
Step 3
- Separate the two covers.
- Put aside the white sheets.
- Do not put the white sheets on any surface. Only keep them in the covers.
- Use the tweezers to remove the sting glue and separate the glue from the sensor.
Separate the two covers.
Put aside the white sheets.
Do not put the white sheets on any surface. Only keep them in the covers.
Use the tweezers to remove the sting glue and separate the glue from the sensor.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 6 other contributors
Payton Butler
Member since: 09/18/2018
205 Reputation
2 Guides authored
Badges:
4
+1 more badge
Team
University of North Texas, Team S4-G4, Raign Fall 2018
Member of University of North Texas, Team S4-G4, Raign Fall 2018
UNT-RAIGN-F18S4G4
3 Members
8 Guides authored