Difficulty

Difficult

Steps

7

Time Required

                          10 - 15 minutes

Sections

2

  • Back cover
  • 5 steps
  • Speakers
  • 2 steps

Flags

5

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

Missed a Step

Oops! This guide is currently missing some important steps.

Grammar Police

Embrace your inner English teacher and help improve this guide’s grammar!

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackSupersonic Matrix SC-91MID

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back cover
  • First, separate the halves by wedging it open with the wedger.

First, separate the halves by wedging it open with the wedger.

1024

Step 2

  • Next, carefully remove the display ribbons from the motherboard by using tweezers.

Next, carefully remove the display ribbons from the motherboard by using tweezers.

Step 3

  • Then, remove the battery from the back cover by using the wedging tool.
  • You might have some difficulty removing due to glue holding the battery in place.

Then, remove the battery from the back cover by using the wedging tool.

You might have some difficulty removing due to glue holding the battery in place.

Step 4

  • Now pop off the speakers with the wedger.
  • Remove 3 Philips screws from the motherboard and then remove the motherboard.

Now pop off the speakers with the wedger.

Remove 3 Philips screws from the motherboard and then remove the motherboard.

Step 5

  • Lastly, make sure you have removed all of the excess pieces from the back cover.

Lastly, make sure you have removed all of the excess pieces from the back cover.

Step 6

              Speakers
  • Remove the Speakers by using the Metal Spudger
  • Insert the Metal Spudger between the speakers and the back cover and then lift each speaker out of their compartments

Remove the Speakers by using the Metal Spudger

Insert the Metal Spudger between the speakers and the back cover and then lift each speaker out of their compartments

Step 7

  • Desolder the 4 speaker wires using a soldering station.
  • If you’re unfamiliar with soldering or desoldering check out this guide.
  • Be sure to wear protective eye wear. Also, keep in mind that the soldering iron will become extremely hot.
  • The tool in the picture is not required for this step. It is just being used to point out the wires.

Desolder the 4 speaker wires using a soldering station.

If you’re unfamiliar with soldering or desoldering check out this guide.

Be sure to wear protective eye wear. Also, keep in mind that the soldering iron will become extremely hot.

The tool in the picture is not required for this step. It is just being used to point out the wires.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Andrew Osborn

Member since: 03/21/2017

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Texas Tech, Team S46-G4, Bennett Spring 2017                        

                                                  Member of Texas Tech, Team S46-G4, Bennett Spring 2017 



                    TTU-BENNETT-S17S46G4                     


                                            3 Members                     


                                            6 Guides authored