Difficulty

Moderate

Steps

4

Time Required

                          25 - 30 minutes

Sections

1

  • Screen
  • 4 steps

Flags

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

  • BackSupersonic Matrix SC-91MID

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Screen
  • Place the plastic opening tool between the screen and the main component and pry open between the two. Once removed place the main component in a safe place and continue working on the screen section (highlighted in red).
  • Be aware of the wires when removing the display screen from the main component (highlighted in orange)

Place the plastic opening tool between the screen and the main component and pry open between the two. Once removed place the main component in a safe place and continue working on the screen section (highlighted in red).

Be aware of the wires when removing the display screen from the main component (highlighted in orange)

1024

Step 2

  • Place the plastic opening tool between the metal screen plate and the black front casing.
  • There are small clips where the plastic opening tool can be placed to help pry the screen from the casing.

Place the plastic opening tool between the metal screen plate and the black front casing.

There are small clips where the plastic opening tool can be placed to help pry the screen from the casing.

Step 3

  • Continue to slide the opening tool along the length of the casing until there is a clear separation between the screen and the cover (as shown in the third image).

Continue to slide the opening tool along the length of the casing until there is a clear separation between the screen and the cover (as shown in the third image).

Step 4

  • Once there is a clearing, carefully remove the screen from the black cover. You now have separated the screen from the tablet device and and are now ready to replace screen.

Once there is a clearing, carefully remove the screen from the black cover. You now have separated the screen from the tablet device and and are now ready to replace screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Norikuni Nishikawa

Member since: 03/31/2018

139 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       IUPUI, Team S1-G1, Wilson Spring 2018                        

                                                  Member of IUPUI, Team S1-G1, Wilson Spring 2018 



                    IUPUI-WILSON-S18S1G1                     


                                            5 Members                     


                                            6 Guides authored