Supersonic Matrix Sc 91Mid Motherboard Replacement Repair Guide

Difficulty

Difficult

Steps

4

Time Required

                          30 minutes            

Sections

1

• Motherboard
• 4 steps

Flags

3

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

• BackSupersonic Matrix SC-91MID

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Motherboard               

• Use the plastic opening tool to separate the screen from the back cover.

Use the plastic opening tool to separate the screen from the back cover.

1024

Step 2

• Use the tweezers to lift the tab shown in the picture, and remove the orange ribbon from it gently. Repeat for all three ribbons on the device.

Use the tweezers to lift the tab shown in the picture, and remove the orange ribbon from it gently. Repeat for all three ribbons on the device.

Step 3

• Use the Phillips 1.5 mm screwdriver (Phillips #000) to unscrew the green motherboard from the body at the three points
• Remove the washers (red)

Use the Phillips 1.5 mm screwdriver (Phillips #000) to unscrew the green motherboard from the body at the three points

Remove the washers (red)

Step 4

• Use a hot soldering tool to desolder the wires connecting the motherboard to the speaker. Desolder the wires connecting the motherboard to the battery.
• Red: Speakers
• Orange: Battery
• Yellow: LED
• Check if your replacement motherboard comes with an LED. You may have to desolder the LED from your old motherboard and solder it to your replacement.

Use a hot soldering tool to desolder the wires connecting the motherboard to the speaker. Desolder the wires connecting the motherboard to the battery.

Red: Speakers

Orange: Battery

Yellow: LED

Check if your replacement motherboard comes with an LED. You may have to desolder the LED from your old motherboard and solder it to your replacement.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Sakshi Labhane                     

Member since: 04/07/2018

139 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       IUPUI, Team S1-G1, Wilson Spring 2018                        

                                                  Member of IUPUI, Team S1-G1, Wilson Spring 2018 



                    IUPUI-WILSON-S18S1G1                     


                                            5 Members                     


                                            6 Guides authored