Difficulty

Moderate

Steps

5

Time Required

                          20 minutes

Sections

1

  • Back Cover
  • 5 steps

Flags

2

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackSupersonic Matrix SC-91MID

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • To begin, insert the plastic opening tool between the display and back cover and apply force until the back cover comes free from the device.

To begin, insert the plastic opening tool between the display and back cover and apply force until the back cover comes free from the device.

1024

Step 2

  • Carefully remove orange ribbons from the motherboard by opening the small plastic flaps and pulling with tweezers.
  • This will disconnect the front part of the tablet from the back entirely. Set it safely aside and continue

Carefully remove orange ribbons from the motherboard by opening the small plastic flaps and pulling with tweezers.

This will disconnect the front part of the tablet from the back entirely. Set it safely aside and continue

Step 3

  • To remove the battery, use the plastic opening tool to pry one corner off of the battery and gently move the opening tool down to pull up one side of the battery.
  • The battery is glued down, so some force may be required to remove it from the back cover.

To remove the battery, use the plastic opening tool to pry one corner off of the battery and gently move the opening tool down to pull up one side of the battery.

The battery is glued down, so some force may be required to remove it from the back cover.

Step 4

  • To remove the speakers, use the plastic opening tool to gently pry the speaker from the back cover, then use the tweezers to remove them fully.

To remove the speakers, use the plastic opening tool to gently pry the speaker from the back cover, then use the tweezers to remove them fully.

Step 5

  • To remove the motherboard, start by unscrewing the three (3) small Phillips head screws using a 1.5 mm Phillips head (Phillips #000) screwdriver.
  • The small red washers must be kept along with the screws when reassembling the device, make sure you store them safely until reassembling.
  • The motherboard has soldered connections to the battery, speakers, and the charging indicator LED. Be careful when pulling the motherboard from the back cover because these parts will come along with it.

To remove the motherboard, start by unscrewing the three (3) small Phillips head screws using a 1.5 mm Phillips head (Phillips #000) screwdriver.

The small red washers must be kept along with the screws when reassembling the device, make sure you store them safely until reassembling.

The motherboard has soldered connections to the battery, speakers, and the charging indicator LED. Be careful when pulling the motherboard from the back cover because these parts will come along with it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Michael Turner

Member since: 03/31/2018

121 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       IUPUI, Team S1-G1, Wilson Spring 2018                        

                                                  Member of IUPUI, Team S1-G1, Wilson Spring 2018 



                    IUPUI-WILSON-S18S1G1                     


                                            5 Members                     


                                            6 Guides authored