Supersonic Matrix Mid Sc 999 Microphone Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          5 - 10 minutes

Sections

Back Cover
3 steps
Microphone
2 steps

Flags

BackSuperSonic Matrix Mid SC-999
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Because this task requires the use of a soldering iron, prior experience with soldering/desoldering will be beneficial.

What you need

Step 1

              Back Cover

Wedge the plastic opening tool between the back cover of the device and the front panel.
You will hear a snapping sound as the cover is separated from the body of the device.

Wedge the plastic opening tool between the back cover of the device and the front panel.

You will hear a snapping sound as the cover is separated from the body of the device.

1024

Step 2

Slide the opening tool along the seam between the front panel and the back cover to un-clip the remaining connections around the device.
Again, you will hear a snapping sound as the cover is separated from the body of the device.

Slide the opening tool along the seam between the front panel and the back cover to un-clip the remaining connections around the device.

Again, you will hear a snapping sound as the cover is separated from the body of the device.

Step 3

Lift the back cover from the body of the device to expose the internal components.

Lift the back cover from the body of the device to expose the internal components.

Step 4

              Microphone

Remove the microphone from its compartment.
The microphone is located toward the bottom left corner of the device (assuming the speakers are located on the right side of you).

Remove the microphone from its compartment.

The microphone is located toward the bottom left corner of the device (assuming the speakers are located on the right side of you).

Step 5

Use the soldering iron to remove the wires connected to the microphone.
If you’re unfamiliar with soldering or desoldering, check out this guide.
Be sure to wear protective eye wear. Also, keep in mind that the soldering iron will become extremely hot.

Use the soldering iron to remove the wires connected to the microphone.

If you’re unfamiliar with soldering or desoldering, check out this guide.

Be sure to wear protective eye wear. Also, keep in mind that the soldering iron will become extremely hot.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Harris Dagha

Member since: 03/26/2015

866 Reputation

                                      7 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges

Team

                       Dr Shaverz boyz                        

                                                  Member of Dr Shaverz boyz 



                    Community                     


                                            3 Members                     


                                            14 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team