Difficulty
Moderate
Steps
5
Time Required
10 - 15 minutes
Sections
2
- Back Cover
- 3 steps
- Headphone Jack
- 2 steps
Flags
0
BackSuperSonic Matrix Mid SC-999
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Because this task requires the use of a soldering iron, prior experience with soldering/desoldering will be beneficial.
What you need
Step 1
Back Cover
- Wedge the plastic opening tool between the back cover of the device and the front panel.
- You will hear a snapping sound as the cover is separated from the body of the device.
Wedge the plastic opening tool between the back cover of the device and the front panel.
You will hear a snapping sound as the cover is separated from the body of the device.
1024
Step 2
- Slide the opening tool along the seam between the front panel and the back cover to un-clip the remaining connections around the device.
- Again, you will hear a snapping sound as the cover is separated from the body of the device.
Slide the opening tool along the seam between the front panel and the back cover to un-clip the remaining connections around the device.
Again, you will hear a snapping sound as the cover is separated from the body of the device.
Step 3
- Lift the back cover from the body of the device to expose the internal components.
Lift the back cover from the body of the device to expose the internal components.
Step 4
Headphone Jack
- Locate the headphone jack on the device.
Locate the headphone jack on the device.
Step 5
- Desolder the 5 soldered connections (marked in red) that connect the headphone jack to the device.
- If you’re unfamiliar with soldering or desoldering check out this guide.
- Be sure to wear protective eye wear. The soldering iron will become extremely hot, so be mindful in your handling.
Desolder the 5 soldered connections (marked in red) that connect the headphone jack to the device.
If you’re unfamiliar with soldering or desoldering check out this guide.
Be sure to wear protective eye wear. The soldering iron will become extremely hot, so be mindful in your handling.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Harris Dagha
Member since: 03/26/2015
866 Reputation
7 Guides authored
Badges:
15
+12 more badges
Team
Dr Shaverz boyz
Member of Dr Shaverz boyz
Community
3 Members
14 Guides authored