Sungale Cyberus Screen Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

Suggest a time??

Sections

1

• Screen
• 6 steps

Flags

0

• BackSungale CyberUs

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Screen               

• Make sure to have the device turned off to prevent any minor electric shock.
• Hold the device so the left side is facing towards you (like in the picture shown) so the two 4mm PH001 screws are exposed and easier to access.

Make sure to have the device turned off to prevent any minor electric shock.

Hold the device so the left side is facing towards you (like in the picture shown) so the two 4mm PH001 screws are exposed and easier to access.

1024

Step 2

• Remove both 4mm PH001 screws from the side panel.

Remove both 4mm PH001 screws from the side panel.

Step 3

• Carefully pry up one of the top corners of the screen with a plastic spudger (prying tool). Slide the tool along the edges to release it from the housing.
• The screen may make some cracking noises as you pry it from the casing. This is expected.
• The screen is still connected to the motherboard. Use force with caution.

Carefully pry up one of the top corners of the screen with a plastic spudger (prying tool). Slide the tool along the edges to release it from the housing.

The screen may make some cracking noises as you pry it from the casing. This is expected.

The screen is still connected to the motherboard. Use force with caution.

Step 4

• Gently turn screen over, to the side, to reveal the ZIF connector attached to the motherboard.

Gently turn screen over, to the side, to reveal the ZIF connector attached to the motherboard.

Step 5

• Gently using tweezers, flip the black clip up. Pull the ZIF connector out.
• You screen is still not completely detached from the device.

Gently using tweezers, flip the black clip up. Pull the ZIF connector out.

You screen is still not completely detached from the device.

Step 6

• Using the prying tool, slide the black clip out. Pull the ZIF connector out and to the left, the screen is now detached from the motherboard.

Using the prying tool, slide the black clip out. Pull the ZIF connector out and to the left, the screen is now detached from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Carolina Cardona                     

Member since: 09/28/2016

62 Reputation

                                      1 Guide authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       IUPUI, Team 1-4, Harley Fall 2016                        

                                                  Member of IUPUI, Team 1-4, Harley Fall 2016 



                    IUPUI-HARLEY-F16S1G4                     


                                            3 Members                     


                                            8 Guides authored