Difficulty
Easy
Steps
6
Time Required
10 minutes
Sections
2
- Battery
- 2 steps
- Speaker
- 4 steps
Flags
0
BackSungale Cyberus ID707WTA
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Press firmly on lower portion of the back cover and slide the cover towards the bottom to remove cover.
Press firmly on lower portion of the back cover and slide the cover towards the bottom to remove cover.
1024
Step 2
- Pull on the plug carefully until it releases from the port and simply pull the battery out after.
Pull on the plug carefully until it releases from the port and simply pull the battery out after.
Step 3
Speaker
- Pry open the casing with a plastic opening tool .
Pry open the casing with a plastic opening tool .
Step 4
- Unscrew the five 4.5 mm screws to allow access to the motherboard.
- Lift the motherboard and set it onto the backside of the screen.
Unscrew the five 4.5 mm screws to allow access to the motherboard.
Lift the motherboard and set it onto the backside of the screen.
Step 5
- Pry the speaker out of retainer clip with iFixit pry tool.
Pry the speaker out of retainer clip with iFixit pry tool.
Step 6
- Pry the speaker clip from the motherboard using tweezers.
Pry the speaker clip from the motherboard using tweezers.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Austin_Parkes
Member since: 03/21/2018
337 Reputation
3 Guides authored
Badges:
3
Team
IUPUI, Team S4-G4, Baechle Spring 2018
Member of IUPUI, Team S4-G4, Baechle Spring 2018
IUPUI-BAECHLE-S18S4G4
4 Members
6 Guides authored