Sunbeam Snow Cone Maker Dasher Replacement Repair Guide

Difficulty

Moderate

Steps

3

Time Required

                          5 - 15 minutes            

Sections

1

• Dasher
• 3 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

• BackSunbeam Snow Cone Maker

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Dasher               

• Push the button on the back to release the lid. (Missing on this example device.)
• In the photo on the device page it is red.

Push the button on the back to release the lid. (Missing on this example device.)

In the photo on the device page it is red.

1024

Step 2

• Unscrew the dasher by holding it in the middle and turning clockwise.
• You will have to spin it quite a bit.
• Remove the dasher.
• Alternately, you can continue to step 3 to further disassemble the dasher components.

Unscrew the dasher by holding it in the middle and turning clockwise.

You will have to spin it quite a bit.

Remove the dasher.

Alternately, you can continue to step 3 to further disassemble the dasher components.

Step 3

• To take the dasher apart, remove the three 5.5 mm Phillips #00 screws embedded in the plastic. **The 3rd screw is behind the hand in the picture
• Carefully pull the two pieces apart.
• When you’ve finished taking apart the dasher, you should have two parts that are shown in the second picture in this step.

To take the dasher apart, remove the three 5.5 mm Phillips #00 screws embedded in the plastic. **The 3rd screw is behind the hand in the picture

Carefully pull the two pieces apart.

When you’ve finished taking apart the dasher, you should have two parts that are shown in the second picture in this step.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 7 other contributors 

                    Thomas Falcon                     

Member since: 03/24/2015

107 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       University of Alabama, Team 1-5, Naidoo Spring 2015                        

                                                  Member of University of Alabama, Team 1-5, Naidoo Spring 2015 



                    UA-NAIDOO-S15S1G5                     


                                            4 Members                     


                                            2 Guides authored