Sunbeam Fpsbpmm980 Disassembly Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 - 25 minutes

Sections

Sunbeam FPSBPMM980 Disassembly
10 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Better Introduction

Improve this guide by completing or revising its introduction.

BackSunbeam FPSBPMM980
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Phillips #2 Screwdriver.

Potential Hazards:

This device uses electricity and can heat up to high temperatures ; do not disassemble while using or shortly after use.

Some of the metal in the device is quite sharp, use caution.

This guide may be useful if your device has stopped working or you want to replace a certain part within the device.

What you need

Step 1

              Sunbeam FPSBPMM980 Disassembly

Open up the device.
Using the Phillips #2 screwdriver, remove the two 12 mm screws and the two 15 mm screws from the top handle.

Open up the device.

Using the Phillips #2 screwdriver, remove the two 12 mm screws and the two 15 mm screws from the top handle.

1024

Step 2

Remove the lock and spring from the device.

Remove the lock and spring from the device.

Step 3

Remove the handle from the device.

Remove the handle from the device.

Step 4

Using the Phillips #2 screwdriver, remove the two 12 mm screws that attach the top half to the hinges.
Disconnect the top half of the pie mold from the rest of the casing.

Using the Phillips #2 screwdriver, remove the two 12 mm screws that attach the top half to the hinges.

Disconnect the top half of the pie mold from the rest of the casing.

Step 5

On the back of the upper pan, use the Phillips #2 screwdriver to remove the two 12 mm screws that attach the top pan to the hinge.
Using the same screwdriver, remove the two 6 mm screws that attach the thermostat to the back of the top pie mold.

On the back of the upper pan, use the Phillips #2 screwdriver to remove the two 12 mm screws that attach the top pan to the hinge.

Using the same screwdriver, remove the two 6 mm screws that attach the thermostat to the back of the top pie mold.

Step 6

Using the Phillips #2 screwdriver, remove the two 12 mm screws and the two 15 mm screws from the bottom handle.
Remove the bottom handle from the device.
Using the Phillips #2 screwdriver, remove the two 12 mm screws that attach the lower pan to the hinge.

Using the Phillips #2 screwdriver, remove the two 12 mm screws and the two 15 mm screws from the bottom handle.

Remove the bottom handle from the device.

Using the Phillips #2 screwdriver, remove the two 12 mm screws that attach the lower pan to the hinge.

Step 7

Using the Phillips #2 screwdriver, remove the two 12 mm screws that attach the lower pan to the hinge.

Step 8

Close the device and turn it over.
Using the Phillips #2 screwdriver, remove the two 12 mm screws from the bottom lid and slide it out.

Close the device and turn it over.

Using the Phillips #2 screwdriver, remove the two 12 mm screws from the bottom lid and slide it out.

Step 9

All Done!

All Done!

Step 10

Operation Guide: Insert the plug of the pie maker into a 120V socket. The Power (red) light will turn on. Wait until the plates heat up to the necessary temperature and the “Bake ready!” light (green) will turn on.
As soon as the green light turns on, you can use it. After finishing cooking, just unplug the pie maker and leave it open to cool down.
There are only lights that can turn on/off. The red light turns on when you plug the pie maker and the green light turns on when the thermostat detects the necessary temperature on plates.
Temperature is not regulated on this device, but is sensed to indicate when the device is ready for baking.

Operation Guide: Insert the plug of the pie maker into a 120V socket. The Power (red) light will turn on. Wait until the plates heat up to the necessary temperature and the “Bake ready!” light (green) will turn on.

As soon as the green light turns on, you can use it. After finishing cooking, just unplug the pie maker and leave it open to cool down.

There are only lights that can turn on/off. The red light turns on when you plug the pie maker and the green light turns on when the thermostat detects the necessary temperature on plates.

Temperature is not regulated on this device, but is sensed to indicate when the device is ready for baking.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    Etai Kurtzman

Member since: 09/16/2021

231 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Tufts University School of Engineering, Team 1-3, Bell Fall 2021                        

                                                  Member of Tufts University School of Engineering, Team 1-3, Bell Fall 2021 



                    TUFTS-BELL-F21S1G3                     


                                            2 Members                     


                                            1 Guide authored

Needs Better Images#

Needs More Images#

Better Introduction#

Introduction#

What you need#

Team#