Difficulty

Easy

Steps

6

Time Required

                          5 - 10 minutes

Sections

2

  • Outer Case
  • 2 steps
  • Battery
  • 4 steps

Flags

0

  • BackSun King Solo Solar Lantern

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Locate and Remove the Screws
  • Place the lamp LED side down on a clean workspace.
  • Remove the screws holding the casing together using a Phillips #1 Screwdriver.

Place the lamp LED side down on a clean workspace.

Remove the screws holding the casing together using a Phillips #1 Screwdriver.

1024

Step 2

              Separate the Device
  • Gently pull the two halves of the lamp apart.

Gently pull the two halves of the lamp apart.

Step 3

              Isolate the Battery
  • Locate the battery.
  • Gently lift the battery from the device.

Locate the battery.

Gently lift the battery from the device.

Step 4

              Remove the Battery
  • Locate the clip attaching the battery pack to the circuit board.
  • Use tweezers to remove the portion of the clip attached to the battery.
  • Do not pull directly on the wires! They can easily be damaged.

Locate the clip attaching the battery pack to the circuit board.

Use tweezers to remove the portion of the clip attached to the battery.

Do not pull directly on the wires! They can easily be damaged.

Step 5

              Replace the Battery
  • Align the black wire of the new battery towards the center of the device.
  • Press down firmly on the clip to insure that it is properly connected.
  • Properly dispose of the Lithium-Ion Battery. Lithium Battery Disposal

Align the black wire of the new battery towards the center of the device.

Press down firmly on the clip to insure that it is properly connected.

Properly dispose of the Lithium-Ion Battery. Lithium Battery Disposal

Step 6

              Reseat the Battery
  • Seat the battery in the orange component so that the short end of the battery pack is touching the foam bumper.

Seat the battery in the orange component so that the short end of the battery pack is touching the foam bumper.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.

Author

                                      with 2 other contributors 


                    Anna

Member since: 10/23/2014

595 Reputation

                                      4 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Michigan Tech, Team 1-3, Lauer Fall 2014                        

                                                  Member of Michigan Tech, Team 1-3, Lauer Fall 2014 



                    MTU-LAUER-F14S1G3                     


                                            3 Members                     


                                            5 Guides authored

SHARATH PONUGOTI - Mar 13, 2017

Reply

please help in finding the life p04 battery,3.2v ,1500 mah,batch #20309

as my solar lights battery is dead..iam unable to find out whr i will get a new one

johnkoisasi - Jun 20, 2017

Reply

where to get the battery spare part?

Stanley - Oct 20, 2017

Reply

Please help me in finding PRO sunking battery 6.6v,1450mAh, Batch 30130.

Please contact me:stanleymayor944@yahoo.com

kapildeo mandal - Sep 29, 2018

Reply

Howi can get 6.6 v sunking pro battery?please help me.