Difficulty
Easy
Steps
6
Time Required
5 minutes
Sections
1
- Buttons
- 6 steps
Flags
Step Trimmer
This guide has unnecessary steps. Trim them to be more concise!
BackBaby Monitor
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Buttons
- Remove three 8mm Phillips screws.
Remove three 8mm Phillips screws.
1024
Step 2
- Remove four 3mm screws below the battery.
Remove four 3mm screws below the battery.
Step 3
- Detach the battery.
Detach the battery.
Step 4
- Remove broken side button used for volume.
Remove broken side button used for volume.
Step 5
- To ensure full success, be sure to clean or replace the buttons.
To ensure full success, be sure to clean or replace the buttons.
Step 6
- Place the new button on top of the unit and place the top over as shown.
Place the new button on top of the unit and place the top over as shown.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Courtney
Member since: 06/01/2016
101 Reputation
1 Guide authored
Badges:
2
Team
Central Coast New Tech High, Team 7-7, Rushing Spring 2016
Member of Central Coast New Tech High, Team 7-7, Rushing Spring 2016
CCNTH-RUSHING-S16S7G7
1 Member
1 Guide authored
