Difficulty
Moderate
Steps
4
Time Required
10 minutes
Sections
1
- Seat
- 4 steps
Flags
0
BackSummer Infant 3D Lite
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Seat
- Remove the two silver 12.7 mm #01 screws (1 on each side) holding the back of the seat to the frame.
Remove the two silver 12.7 mm #01 screws (1 on each side) holding the back of the seat to the frame.
1024
Step 2
- Unscrew the four silver 12.7 mm #01 screws (2 on each side) holding the fabric along the handlebars on both sides.
Unscrew the four silver 12.7 mm #01 screws (2 on each side) holding the fabric along the handlebars on both sides.
Step 3
- Unscrew the four silver 12.7 mm #01 (2 on each side) screws on the bottom of the frame where the fabric is held in place.
Unscrew the four silver 12.7 mm #01 (2 on each side) screws on the bottom of the frame where the fabric is held in place.
Step 4
- After checking that all screws are unattached, pull the seat off.
After checking that all screws are unattached, pull the seat off.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Pradeep Sangli
Member since: 09/29/2015
116 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
Cal Poly, Team 11-5, Forte Fall 2015
Member of Cal Poly, Team 11-5, Forte Fall 2015
CPSU-FORTE-F15S11G5
4 Members
3 Guides authored
