Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

1

  • Air Filter
  • 7 steps

Flags

0

  • BackSterwins 460BSP500E-3 Mower

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Locate the air filter cover               
  • The air filter is located inside a plastic housing mounted on the left side of the engine.

The air filter is located inside a plastic housing mounted on the left side of the engine.

1024

Step 2

              Open the air filter cover               
  • Lift up the cover locking tab located on the top of the filter housing.
  • Swing the cover open.
  • Once it is fully open, lift the cover off the hinges and remove it.

Lift up the cover locking tab located on the top of the filter housing.

Swing the cover open.

Once it is fully open, lift the cover off the hinges and remove it.

Step 3

              Remove the air filter               
  • Grasp the old filter and pull it out of the housing.

Grasp the old filter and pull it out of the housing.

Step 4

              Clean the filter housing               
  • Remove old oil and dirt from the inside of the filter housing with absorbent paper or cloth.

Remove old oil and dirt from the inside of the filter housing with absorbent paper or cloth.

Step 5

              Filter replacement               
  • Soak the new air filter with a teaspoon of motor oil.
  • Position the air filter in the housing.

Soak the new air filter with a teaspoon of motor oil.

Position the air filter in the housing.

Step 6

              Reinstall the cover               
  • Replace the cover by aligning the two lower hinge tabs in their slots.

Replace the cover by aligning the two lower hinge tabs in their slots.

Step 7

              Latching the cover               
  • Swing the cover back up into place. Press firmly on the top edge until the latch seats.

Swing the cover back up into place. Press firmly on the top edge until the latch seats.

Cancel: I did not complete this guide.

        Jerry W is helping us fix the world!      Want to contribute?      Start translating › 

Special thanks to these translators:

100%

Jerry W

Author

                                      with 1 other contributor 

                    iRobot                     

Member since: 09/24/2009

1 Reputation

                                      646 Guides authored                  



                       Badges:
                       36







                                                        +33 more badges