Difficulty

Very easy

Steps

6

Time Required

                          4 - 6 minutes

Sections

1

  • Pump Tube
  • 6 steps

Flags

3

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackStenner Econ Peristaltic Chemical Pump (E20PHx)

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Unlock Roller Assembly Cover
  • Locate the latch on the left side of the pump casing and using your thumb rotate it from the left fully to the right.

Locate the latch on the left side of the pump casing and using your thumb rotate it from the left fully to the right.

1024

Step 2

              Remove Roller Assembly Cover
  • Slide the roller assembly cover in the direction of the latch to remove.

Slide the roller assembly cover in the direction of the latch to remove.

Step 3

              Remove Old Pump Tube from Roller Assembly
  • Slide one side of the pump tube to remove it from it’s mount.
  • Repeat the process for the other end of the tube.

Slide one side of the pump tube to remove it from it’s mount.

Repeat the process for the other end of the tube.

Step 4

              Install New Pump Tube
  • Insert the new pump tube taking care to ensure it seats properly into the pump tube mount.
  • Stretch the new tube around the roller and slide it into the pump tube mount on the other side.

Insert the new pump tube taking care to ensure it seats properly into the pump tube mount.

Stretch the new tube around the roller and slide it into the pump tube mount on the other side.

Step 5

              Reinstall Roller Assembly Cover
  • Using two fingers, squeeze both ends of the new pump tube.
  • While compressing the tube ends, slide the roller assembly cover back on to the pump. Ensure the roller assembly cover follows the guide rails.

Using two fingers, squeeze both ends of the new pump tube.

While compressing the tube ends, slide the roller assembly cover back on to the pump. Ensure the roller assembly cover follows the guide rails.

Step 6

              Lock Roller Assembly Cover
  • Secure the roller assembly cover to the pump by rotating the latch on the left side of the pump casing and using your thumb rotate it from the right fully to the left.

Secure the roller assembly cover to the pump by rotating the latch on the left side of the pump casing and using your thumb rotate it from the right fully to the left.

You have now successfully replaced the pump tube yourself, saving you a service call from a dealer or plumber.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    N. T. Crotser

Member since: 06/13/2022

559 Reputation

                                      4 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge