Difficulty

Moderate

Steps

6

Time Required

                          15 minutes

Sections

3

  • Headset Ear Cushions
  • 1 step
  • Headset Circuit Board
  • 4 steps
  • Headset Mute Button Cap
  • 1 step

Flags

0

  • BackSteelSeries Arctis Pro Plus GameDAC

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Headset Ear Cushions
  • Lift the edge of the cushion and pull out slightly.
  • Work your way around the cushion until it comes off completely.
  • Repeat for the other cushion.

Lift the edge of the cushion and pull out slightly.

Work your way around the cushion until it comes off completely.

Repeat for the other cushion.

1024

Step 2

              Headset Circuit Board
  • Remove the three 5mm screws with a Phillips #0 driver head on the headphone with the microphone.

Remove the three 5mm screws with a Phillips #0 driver head on the headphone with the microphone.

Step 3

  • Lift the speaker off the headset to expose the circuit board.
  • Be careful not to lift the speaker too quickly or too forcefully to prevent the wires from being pulled out of their connections.

Lift the speaker off the headset to expose the circuit board.

Be careful not to lift the speaker too quickly or too forcefully to prevent the wires from being pulled out of their connections.

Step 4

  • Remove the three 5mm screws using a Phillips #0 driver head.

Remove the three 5mm screws using a Phillips #0 driver head.

Step 5

  • Lift the circuit board out of the plastic housing.
  • Press in on the volume wheel while pulling on the circuit board to help maneuver the circuit board out of the housing.

Lift the circuit board out of the plastic housing.

Press in on the volume wheel while pulling on the circuit board to help maneuver the circuit board out of the housing.

Step 6

              Headset Mute Button Cap
  • Flip the circuit board over and remove the keycap by pulling on it.

Flip the circuit board over and remove the keycap by pulling on it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 2 other contributors 


                    Kyle Chang

Member since: 01/24/2019

1,064 Reputation

                                      7 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges

Team

                       Cal Poly, Team S18-G1, White Winter 2019                        

                                                  Member of Cal Poly, Team S18-G1, White Winter 2019 



                    CPSU-WHITE-W19S18G1                     


                                            4 Members                     


                                            21 Guides authored

Pete - Sep 15, 2022

Reply

Can you provide a part number or link to order the replacement mute button cap?