Steelseries Arctis Pro Plus Gamedac 3 5Mm Headphone Jack Replacement Repair Guide

Difficulty

Difficult

Steps

6

Time Required

                          25 - 35 minutes            

Sections

1

• 3.5mm Headphone Jack
• 6 steps

Flags

0

• BackSteelSeries Arctis Pro Plus GameDAC

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              3.5mm Headphone Jack               

• Lift the edge of the cushion and slightly pull out.
• Work your way around the cushion until it comes off.
• Repeat for the other cushion.

Lift the edge of the cushion and slightly pull out.

Work your way around the cushion until it comes off.

Repeat for the other cushion.

1024

Step 2

• Remove the three 5mm screws with a Phillips #0 driver head on the headphone with the microphone.

Remove the three 5mm screws with a Phillips #0 driver head on the headphone with the microphone.

Step 3

• Lift the speaker off the headset to expose the circuit board.
• Be careful not to lift the speaker too quickly or too forcefully to prevent the wires from being pulled out of their connections.

Lift the speaker off the headset to expose the circuit board.

Be careful not to lift the speaker too quickly or too forcefully to prevent the wires from being pulled out of their connections.

Step 4

• Remove the three 5mm screws using a Phillips #0 driver head.

Remove the three 5mm screws using a Phillips #0 driver head.

Step 5

• Lift the circuit board out of the plastic housing.
• Press in on the volume wheel while pulling on the circuit board to help maneuver the circuit board out of the housing.

Lift the circuit board out of the plastic housing.

Press in on the volume wheel while pulling on the circuit board to help maneuver the circuit board out of the housing.

Step 6

• Desolder the three connecting audio jack leads from the circuit board.
• For help desoldering connections, follow this useful guide on How To Solder and Desolder Connections.
• Use caution when soldering. The heated tip may cause damage to the board or burn you.

Desolder the three connecting audio jack leads from the circuit board.

For help desoldering connections, follow this useful guide on How To Solder and Desolder Connections.

Use caution when soldering. The heated tip may cause damage to the board or burn you.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Juan Gonzalez                     

Member since: 01/24/2019

387 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Cal Poly, Team S18-G1, White Winter 2019                        

                                                  Member of Cal Poly, Team S18-G1, White Winter 2019 



                    CPSU-WHITE-W19S18G1                     


                                            4 Members                     


                                            21 Guides authored