Stanley St 222A 120 Pressure Sensor Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          15 - 20 minutes

Sections

Pressure Sensor
8 steps

Flags

BackSpace Heater
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Step 1

              Pressure Sensor

Unplug the heater for safety during your repair.

Unplug the heater for safety during your repair.

1024

Step 2

With your hands gently remove the plastic covers on either side of the heater.

With your hands gently remove the plastic covers on either side of the heater.

Step 3

Use your hands to pry apart the plastic halves of the heater to see the internals of the device.

Use your hands to pry apart the plastic halves of the heater to see the internals of the device.

Step 4

Locate small pressure sensor replacement and small pressure pin at the bottom of the device.

Locate small pressure sensor replacement and small pressure pin at the bottom of the device.

Step 5

Use your hands to help guide the pressure pin back into a position where the replacement plate can slide back onto it.
Needle nose pliers may be a good assistant in this situation.

Use your hands to help guide the pressure pin back into a position where the replacement plate can slide back onto it.

Needle nose pliers may be a good assistant in this situation.

Step 6

While the plastic is open hold the pin out with a finger.
Line up the pressure plate to the pressure pin.

While the plastic is open hold the pin out with a finger.

Line up the pressure plate to the pressure pin.

Step 7

Gently put the pressure plate back onto the pressure pin.

Gently put the pressure plate back onto the pressure pin.

Step 8

Carefully press the plastic back together.
Be conscious not to interrupt the placement of the newly repaired pressure plate.

Carefully press the plastic back together.

Be conscious not to interrupt the placement of the newly repaired pressure plate.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor

                    Miles Henderson

Member since: 10/07/2020

216 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Linn Benton Community College, Team S1-G10, Johnson Fall 2020                        

                                                  Member of Linn Benton Community College, Team S1-G10, Johnson Fall 2020 



                    LBCC-JOHNSON-F20S1G10                     


                                            1 Member                     


                                            1 Guide authored

Introduction#

Team#

Introduction

Team