Stanley 10 079 Box Cutter Blade Replacement Repair Guide

Difficulty

Very easy

Steps

8

Time Required

                          50 seconds - 5 minutes            

Sections

1

• Knife Blade
• 8 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackStanley 10-079 Box Cutter

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Knife Blade               

• Here is the knife we will be replacing the blade on, its a Stanley 10-079 Box Cutter.

Here is the knife we will be replacing the blade on, its a Stanley 10-079 Box Cutter.

1024

Step 2

• Using a screwdriver or a coin remove the single screw in the center of the box cutter

Using a screwdriver or a coin remove the single screw in the center of the box cutter

Step 3

• Carefully pull up on the top half of the cutter exposing the blade on the inside.

Carefully pull up on the top half of the cutter exposing the blade on the inside.

Step 4

• carefully without cutting yourself lift the old blade out this should require no force.

carefully without cutting yourself lift the old blade out this should require no force.

Step 5

• with the old blade out replace it with a new blade from the back or one that was purchased separately.

with the old blade out replace it with a new blade from the back or one that was purchased separately.

Step 6

              Reassembly               

• With the fresh blade in place carefully place the upper half of the box cutter on the lower half that contains the blade as shown in image number 2.

With the fresh blade in place carefully place the upper half of the box cutter on the lower half that contains the blade as shown in image number 2.

Step 7

              Final Assembily               

• insert the screw you first removed back into the hole in the center ensuring that you tighten it down not too tight to get undone without a power tool

insert the screw you first removed back into the hole in the center ensuring that you tighten it down not too tight to get undone without a power tool

Step 8

• With the center screw re-installed you are all set to use your Stanley 10-079 box cutter again with a brand new blade.

With the center screw re-installed you are all set to use your Stanley 10-079 box cutter again with a brand new blade.

You are all set and ready to use your brand new installed blade! Here are some replacement blades that I found on amazon. https://www.amazon.com/Stanley-11-921L-5…

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Michael Cawley                     

Member since: 10/11/2017

157 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       Mikes computer and mobile device repairs                        

                                                  Member of Mikes computer and mobile device repairs 



                    Business                     


                                            1 Member                     


                                            1 Guide authored