Difficulty
Very easy
Steps
3
Time Required
5 - 10 minutes
Sections
1
- Lens
- 3 steps
Flags
0
BackSpy Net Ultra Vision Goggles
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Opening the Device
- Remove the six silver 11.4 mm Phillips #0 screws and pry open the device, using the plastic opening tools if necessary. To do this, locate the groves running along the side of the entire device and wedge it open.
Remove the six silver 11.4 mm Phillips #0 screws and pry open the device, using the plastic opening tools if necessary. To do this, locate the groves running along the side of the entire device and wedge it open.
1024
Step 2
Remove the Lens Housing
- Once the device is open, remove the lens tunnel, then twist the lens to unscrew it from the camera.
Once the device is open, remove the lens tunnel, then twist the lens to unscrew it from the camera.
Step 3
- Remove the two black 7.15 mm Phillips #00 screws from the lens.
- Once the screws are out, the lens casing should pull apart.
Remove the two black 7.15 mm Phillips #00 screws from the lens.
Once the screws are out, the lens casing should pull apart.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Andrew Gittens
Member since: 09/22/2014
143 Reputation
4 Guides authored
Badges:
7
+4 more badges
Team
USF Tampa, Team 4-5, Brown Fall 2014
Member of USF Tampa, Team 4-5, Brown Fall 2014
USFT-BROWN-F14S4G5
3 Members
6 Guides authored