Difficulty
Easy
Steps
2
Time Required
5 minutes
Sections
- Speaker
- 1 step
- outer trim
- 1 step
Flags
0
BackSprout Channel Cubby
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Dissasemble the device
- Use an opening tool to push in and release sixteen small plastic clips around the edge of the case. As the clips are released, gradually pry the case apart.
- It is easiest to start on the corners.
Use an opening tool to push in and release sixteen small plastic clips around the edge of the case. As the clips are released, gradually pry the case apart.
It is easiest to start on the corners.
1024
Step 2
outer trim
- There are 19 tabs that need to be pushed out of the inner trim. The metal spudger works great here.
- Do not push too hard on the tabs or they will break.
There are 19 tabs that need to be pushed out of the inner trim. The metal spudger works great here.
Do not push too hard on the tabs or they will break.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
jasen biggins
Member since: 08/26/2015
735 Reputation
5 Guides authored
Badges:
16
+13 more badges
Team
USF Tampa, Team 14-101, Meier Fall 2015
Member of USF Tampa, Team 14-101, Meier Fall 2015
USFT-MEIER-F15S14G101
4 Members
12 Guides authored