Difficulty
Easy
Steps
3
Time Required
4 minutes
Sections
2
- Speaker
- 1 step
- Camera
- 2 steps
Flags
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackSprout Channel Cubby
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Dissasemble the device
- Use an opening tool to push in and release sixteen small plastic clips around the edge of the case. As the clips are released, gradually pry the case apart.
- It is easiest to start on the corners.
Use an opening tool to push in and release sixteen small plastic clips around the edge of the case. As the clips are released, gradually pry the case apart.
It is easiest to start on the corners.
1024
Step 2
Remove the screw
- Remove the single screw attaching the camera to the device.
Remove the single screw attaching the camera to the device.
Step 3
Remove the camera
- Use the opening tool or a fingernail to release the ZIF connector.
- Disconnect the camera ribbon cable.
- Remove the camera.
Use the opening tool or a fingernail to release the ZIF connector.
Disconnect the camera ribbon cable.
Remove the camera.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
jasen biggins
Member since: 08/26/2015
735 Reputation
5 Guides authored
Badges:
16
+13 more badges
Team
USF Tampa, Team 14-101, Meier Fall 2015
Member of USF Tampa, Team 14-101, Meier Fall 2015
USFT-MEIER-F15S14G101
4 Members
12 Guides authored