Difficulty
Easy
Steps
5
Time Required
5 minutes
Sections
1
- Robot Screen
- 5 steps
Flags
0
BackSpin Master Boxer
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Robot Screen
- Set Spin Master Boxer on your workspace so that the bottom panel faces upwards.
Set Spin Master Boxer on your workspace so that the bottom panel faces upwards.
1024
Step 2
- Using a Phillips #00 screw driver, unscrew the four 4mm screws in each corner of the bottom panel.
Using a Phillips #00 screw driver, unscrew the four 4mm screws in each corner of the bottom panel.
Step 3
- Carefully remove the bottom panel of the Spin Master Boxer by lifting up, away from the main body of robot.
Carefully remove the bottom panel of the Spin Master Boxer by lifting up, away from the main body of robot.
Step 4
- While holding onto the axels of the wheels, gently pull the top panel of the robot away from its body.
- Be aware when removing the panel that multiple wires connect it to the body of the Spin Master Boxer.
While holding onto the axels of the wheels, gently pull the top panel of the robot away from its body.
Be aware when removing the panel that multiple wires connect it to the body of the Spin Master Boxer.
Step 5
- Remove the plastic screen from the body of the robot. It should come off easily as it is not attached by anything.
Remove the plastic screen from the body of the robot. It should come off easily as it is not attached by anything.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Lauren Roide
Member since: 04/16/2019
739 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team S1-G1, Maness Spring 2019
Member of Cal Poly, Team S1-G1, Maness Spring 2019
CPSU-MANESS-S19S1G1
4 Members
5 Guides authored