Difficulty

Difficult

Steps

8

Time Required

                          5 minutes

Sections

2

  • Robot Screen
  • 5 steps
  • Robot Battery
  • 3 steps

Flags

0

  • BackSpin Master Boxer

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Robot Screen
  • Set Spin Master Boxer on your workspace so that the bottom panel faces upwards.

Set Spin Master Boxer on your workspace so that the bottom panel faces upwards.

1024

Step 2

  • Using a Phillips #00 screw driver, unscrew the four 4mm screws in each corner of the bottom panel.

Using a Phillips #00 screw driver, unscrew the four 4mm screws in each corner of the bottom panel.

Step 3

  • Carefully remove the bottom panel of the Spin Master Boxer by lifting up, away from the main body of robot.

Carefully remove the bottom panel of the Spin Master Boxer by lifting up, away from the main body of robot.

Step 4

  • While holding onto the axels of the wheels, gently pull the top panel of the robot away from its body.
  • Be aware when removing the panel that multiple wires connect it to the body of the Spin Master Boxer.

While holding onto the axels of the wheels, gently pull the top panel of the robot away from its body.

Be aware when removing the panel that multiple wires connect it to the body of the Spin Master Boxer.

Step 5

  • Remove the plastic screen from the body of the robot. It should come off easily as it is not attached by anything.

Remove the plastic screen from the body of the robot. It should come off easily as it is not attached by anything.

Step 6

              Robot Battery
  • Lift the top panel away from the main body of the robot to expose the yellow battery.

Lift the top panel away from the main body of the robot to expose the yellow battery.

Step 7

  • Insert index finger in between battery and plastic shell of robot, and push battery out of the battery holder toward the wire.

Insert index finger in between battery and plastic shell of robot, and push battery out of the battery holder toward the wire.

Step 8

  • Now that the battery is completely removed, additional efforts, like soldering the wires off, must be taken to replace the battery.
  • How To Solder and Desolder Connections

Now that the battery is completely removed, additional efforts, like soldering the wires off, must be taken to replace the battery.

How To Solder and Desolder Connections

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Lauren Roide

Member since: 04/16/2019

739 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team S1-G1, Maness Spring 2019                        

                                                  Member of Cal Poly, Team S1-G1, Maness Spring 2019 



                    CPSU-MANESS-S19S1G1                     


                                            4 Members                     


                                            5 Guides authored

Chad Laughlin - Jan 25, 2021

Reply

Any tips on where to buy a replacement battery?

Anton Litvinov - Jul 10, 2021

Reply

In fact it’s easy, was able to put 1000 mah Lipo 952540 with a little stretching of battery plastic holder

Buchukoy Jimenez - Aug 3, 2021

Reply

can we replace boxer’s USB slot?