Difficulty
Moderate
Steps
6
Time Required
10 minutes
Sections
1
- Battery
- 6 steps
Flags
0
BackSoundBot SB571
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Before disassembling the speaker, make sure it is powered off.
- Place the speaker on a flat surface.
- Take your blue plastic opening tool and remove the outside cover.
Before disassembling the speaker, make sure it is powered off.
Place the speaker on a flat surface.
Take your blue plastic opening tool and remove the outside cover.
1024
Step 2
- Reorient the speaker so the black panel is facing up.
- Remove the 4, 0.9 cm screws from the back panel using a Phillips PH1 screwdriver.
- Now remove the plate.
Reorient the speaker so the black panel is facing up.
Remove the 4, 0.9 cm screws from the back panel using a Phillips PH1 screwdriver.
Now remove the plate.
Step 3
- Reorient the speaker so the bottom is facing up.
- Remove the 4, 0.9cm screws from the bottom using a Phillips PH0 screw driver.
- Now open the plate.
Reorient the speaker so the bottom is facing up.
Remove the 4, 0.9cm screws from the bottom using a Phillips PH0 screw driver.
Now open the plate.
Step 4
- With the bottom plate removed now use the blue plastic opening tool to lift up the circuit board from the device.
With the bottom plate removed now use the blue plastic opening tool to lift up the circuit board from the device.
Step 5
- Disconnect the battery wires from the circuit board.
Disconnect the battery wires from the circuit board.
Step 6
- Reorient the speaker so the back side is facing up.
- Now that the battery wires have been disconnected, use a blue plastic tool to release the battery from the adhesive strip.
- Loop the battery wires through the opening in the back plate.
- The battery and it’s connective wires have been completely removed from the speaker.
Reorient the speaker so the back side is facing up.
Now that the battery wires have been disconnected, use a blue plastic tool to release the battery from the adhesive strip.
Loop the battery wires through the opening in the back plate.
The battery and it’s connective wires have been completely removed from the speaker.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
10 other people completed this guide.
Author
with 1 other contributor
Yana
Member since: 02/09/2016
606 Reputation
2 Guides authored
Badges:
17
+14 more badges
Team
USF Tampa, Team 2-50, Cagle Spring 2016
Member of USF Tampa, Team 2-50, Cagle Spring 2016
USFT-CAGLE-S16S2G50
4 Members
2 Guides authored
Madhu Mohan Bhukya - Nov 13, 2017
Reply
Please provide the source to buy the replacement battery
Raj Saini - Nov 23, 2018
Reply
Sir ,m n jully m flipcart se soundbot buy tha jisme kuch dikat aa rhi h bettery ki bajah se
international.loop - Oct 19, 2019
Reply
They don’t sell batteries!!
It says above that battery not for sale.
Mark Friend - Apr 25, 2020
Reply
A simple online search and you will find the battery.