Difficulty

Difficult

Steps

6

Time Required

                          30 minutes            

Sections

2

  • Front Panel
  • 1 step
  • Front Screen Motherboard
  • 5 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackSony Xplod CDX-MP30

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Front Panel               
  • Press down the release button on the bottom left corner of the face plate.
  • Then remove the face plate carefully.

Press down the release button on the bottom left corner of the face plate.

Then remove the face plate carefully.

1024

Step 2

              Front Screen Motherboard               
  • Using the Phillips #0 Screwdriver, unscrew the 4 (length - 11.11mm) screws on the front screen.

Using the Phillips #0 Screwdriver, unscrew the 4 (length - 11.11mm) screws on the front screen.

Step 3

  • Use two fingers to create a small gap in the top of the faceplate, as indicated in the picture.

Use two fingers to create a small gap in the top of the faceplate, as indicated in the picture.

Step 4

  • Insert the flat end of the Heavy-duty Spudger into the opening you created.
  • Slide it to the right carefully, until you feel the screen pop off.
  • Make sure you keep the face of the screen pointed down as you carefully lift off the freed black portion of the screen - as shown in the picture.

Insert the flat end of the Heavy-duty Spudger into the opening you created.

Slide it to the right carefully, until you feel the screen pop off.

Make sure you keep the face of the screen pointed down as you carefully lift off the freed black portion of the screen - as shown in the picture.

Step 5

  • Gently grab the Front Motherboard - as indicated in the picture - and lift it from the rest of the screen.

Gently grab the Front Motherboard - as indicated in the picture - and lift it from the rest of the screen.

Step 6

  • To remove the LCD, please refer to the iFixit soldering guide.
  • Once the LCD screen is removed, you have unrestricted access to the front screen motherboard.

To remove the LCD, please refer to the iFixit soldering guide.

Once the LCD screen is removed, you have unrestricted access to the front screen motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 

                    Chao Chen                     

Member since: 10/04/2011

79 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Cal Poly, Team 5-35, Amido Fall 2011                        

                                                  Member of Cal Poly, Team 5-35, Amido Fall 2011 



                    CPSU-AMIDO-F11S5G35                     


                                            4 Members                     


                                            8 Guides authored