Difficulty
Moderate
Steps
8
Time Required
Suggest a time??
Sections
1
- Main flex
- 8 steps
Flags
2
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
Better Introduction
Improve this guide by completing or revising its introduction.
BackSony Xperia Z3 (Dual)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Main flex
- Heat to soften back cover sticker.
- Place suction cup and pull open a gap.
Heat to soften back cover sticker.
Place suction cup and pull open a gap.
1024
Step 2
- Insert into guitar pick, slide and cut the sticker. Finally, remove the back cover.
Insert into guitar pick, slide and cut the sticker. Finally, remove the back cover.
Step 3
- Remove the battery.
Remove the battery.
Step 4
- Twist off two screws here.
- Release all the connectors connecting with loudspeaker assembly.
- Remove vibrator securing bracket.
Twist off two screws here.
Release all the connectors connecting with loudspeaker assembly.
Remove vibrator securing bracket.
Step 5
- Remove loudspeaker assembly cover and assembly itself.
Remove loudspeaker assembly cover and assembly itself.
Step 6
- Pry up the MIC. It’s a part of the main flex.
- Release the connector with LCD screen flex and the connector with motherboard.
Pry up the MIC. It’s a part of the main flex.
Release the connector with LCD screen flex and the connector with motherboard.
Step 7
- Push the upper power button & volume button flex branch bracket as the direction marked, and then remove it easily.
- Pry up the lower shutter button flex branch bracket carefully. It’s different from the upper one, it’s come with the flex together but the upper one not.
Push the upper power button & volume button flex branch bracket as the direction marked, and then remove it easily.
Pry up the lower shutter button flex branch bracket carefully. It’s different from the upper one, it’s come with the flex together but the upper one not.
Step 8
- Get the flex from the sticker underneath carefully.
- And then, take the power button & volume button flex branch out from the slot.
- Finally, remove the whole main flex.
Get the flex from the sticker underneath carefully.
And then, take the power button & volume button flex branch out from the slot.
Finally, remove the whole main flex.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
16 other people completed this guide.
Author
with 2 other contributors
Sophia
Member since: 03/25/2014
43,666 Reputation
62 Guides authored
Badges:
26
+23 more badges
mehdi ghanbarian - Mar 11, 2016
Reply
Hello
I changed my power, but I felt the power button action do you think the problem of what can be
Thanks
gamaa19700 - May 30, 2017
Reply
very good thnx
Miguel Damayo - Jul 28, 2017
Reply
Is it ok to remove the small copper stickers under the flex?
H ammody - May 21, 2022
Reply
اريد المنتج هذا