Difficulty

Easy

Steps

4

Time Required

                          30 minutes

Sections

1

  • Rear Camera
  • 4 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackSony Xperia Z1

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Rear Camera
  • With caution to hot temperatures, glide a heat gun over the outer edges of the phone bezel to soften the adhesive securing the back panel to the phone.

With caution to hot temperatures, glide a heat gun over the outer edges of the phone bezel to soften the adhesive securing the back panel to the phone.

1024

Step 2

  • Apply a suction cup tool to the center of the back panel and gently pull the panel off the back of the phone.
  • If you are experiencing difficulty, use a plastic opening pick to slide into the crack in between the panel and the rest of the phone body to pry off the back.

Apply a suction cup tool to the center of the back panel and gently pull the panel off the back of the phone.

If you are experiencing difficulty, use a plastic opening pick to slide into the crack in between the panel and the rest of the phone body to pry off the back.

Step 3

  • Using the plastic opening tool, carefully pry off the flex connector beside the camera housing.

Using the plastic opening tool, carefully pry off the flex connector beside the camera housing.

Step 4

  • Use the tweezers to pull the camera out of the top left corner of the phone.

Use the tweezers to pull the camera out of the top left corner of the phone.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Elijah Sigua

Member since: 01/30/2020

255 Reputation

                                      2 Guides authored                  



                       Badges:
                       3

Team

                       Embry-Riddle Aeronautical University, Team S17-G12, Lamothe Spring 2020                        

                                                  Member of Embry-Riddle Aeronautical University, Team S17-G12, Lamothe Spring 2020 



                    ERAU-LAMOTHE-S20S17G12                     


                                            4 Members                     


                                            7 Guides authored