Sony Xperia Xz Premium Front Camera Replacement Repair Guide

Difficulty

Easy

Steps

9

Time Required

                          5 minutes            

Sections

2

• Back Panel
• 3 steps
• Front Camera
• 6 steps

Flags

1

Featured Student Guide

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

• BackSony Xperia XZ Premium

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Panel               

• Place a heated iOpener on the back panel of the phone to melt the adhesive inside.
• The iOpener or your desired heat source can be very hot and can heat up the phone, so make sure you do not burn yourself.
• Follow this guide for directions on using the iOpener.

Place a heated iOpener on the back panel of the phone to melt the adhesive inside.

The iOpener or your desired heat source can be very hot and can heat up the phone, so make sure you do not burn yourself.

Follow this guide for directions on using the iOpener.

1024

Step 2

• Slide a thin plastic card under the back panel and around the perimeter of the phone to remove the adhesive.

Slide a thin plastic card under the back panel and around the perimeter of the phone to remove the adhesive.

Step 3

• Take hold of the back panel with your fingers and remove.

Take hold of the back panel with your fingers and remove.

Step 4

              Front Camera               

• Remove the two bottom left 3.9 mm Phillips #000 screws.

Remove the two bottom left 3.9 mm Phillips #000 screws.

Step 5

• Insert the spudger under the bottom left frame and lift, try to lift vertically to wedge it out.

Insert the spudger under the bottom left frame and lift, try to lift vertically to wedge it out.

Step 6

• Grab hold of the bottom left frame and lift out carefully.

Grab hold of the bottom left frame and lift out carefully.

Step 7

• Insert a spudger under the tab above the camera and lift to disconnect it.

Insert a spudger under the tab above the camera and lift to disconnect it.

Step 8

• Grab hold of the tab with your fingers.

Grab hold of the tab with your fingers.

Step 9

• Lift the camera from the phone by the tab.

Lift the camera from the phone by the tab.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Gelene Amog                     

Member since: 04/18/2018

1,141 Reputation

                                      5 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       Cal Poly, Team S18-G2, Livingston Spring 2018                        

                                                  Member of Cal Poly, Team S18-G2, Livingston Spring 2018 



                    CPSU-LIVINGSTON-S18S18G2                     


                                            5 Members                     


                                            16 Guides authored                     

Gavin - Jul 5, 2019

Reply

The name of this tutorial is incorrect.