Sony Xperia Xa1 Ultra Battery Replacement Repair Guide

Difficulty

Easy

Steps

9

Time Required

                          5 - 6 minutes            

Sections

2

• Back Assembly
• 6 steps
• Battery
• 3 steps

Flags

1

Featured Student Guide

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

• BackSony Xperia XA1 Ultra

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Assembly               

• Wedge your finger under the bottom ridge of the SD card insert.
• Pull outwards with your fingers to remove the SD card from the left side of device.

Wedge your finger under the bottom ridge of the SD card insert.

Pull outwards with your fingers to remove the SD card from the left side of device.

1024

Step 2

• Use a hair dryer to heat each corner of the phone.
• Alternate heating each corner for a minute to loosen the adhesive binding the back cover to the phone.
• Don’t heat one area for too long; the phone may get damaged from overheating.

Use a hair dryer to heat each corner of the phone.

Alternate heating each corner for a minute to loosen the adhesive binding the back cover to the phone.

Don’t heat one area for too long; the phone may get damaged from overheating.

Step 3

• Press a suction cup on a heated corner of the device.
• Hold the phone down and gently lift the suction cup to create a small gap.
• You may hear crunching or popping sounds when you lift up the back cover.

Press a suction cup on a heated corner of the device.

Hold the phone down and gently lift the suction cup to create a small gap.

You may hear crunching or popping sounds when you lift up the back cover.

Step 4

• Insert your iFixit Opening Tool in the small gap between your phone and the back cover.
• Lift up on the iFixit Opening Tool and insert your plastic card in the small gap between your phone and the back cover.

Insert your iFixit Opening Tool in the small gap between your phone and the back cover.

Lift up on the iFixit Opening Tool and insert your plastic card in the small gap between your phone and the back cover.

Step 5

• Slide your plastic card along the side of your phone to loosen the adhesive.
• Move the card along the sides of the phone to lift all of the corners.

Slide your plastic card along the side of your phone to loosen the adhesive.

Move the card along the sides of the phone to lift all of the corners.

Step 6

• Lift up the back cover by lifting up the sides of the phone with your hand.
• Apply a new strip of adhesive for reassembly.

Lift up the back cover by lifting up the sides of the phone with your hand.

Apply a new strip of adhesive for reassembly.

Step 7

              Battery               

• Peel off the two pieces of black tape covering the battery with your hands.

Peel off the two pieces of black tape covering the battery with your hands.

Step 8

• Use the iFixit Opening Tool to remove the flexible orange strip which connects the battery to the motherboard.

Use the iFixit Opening Tool to remove the flexible orange strip which connects the battery to the motherboard.

Step 9

• Wedge the iFixit Opening Tool underneath the battery.
• Remove the battery by pulling up on the iFixit Opening Tool.

Wedge the iFixit Opening Tool underneath the battery.

Remove the battery by pulling up on the iFixit Opening Tool.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      12 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Jacob Jung                     

Member since: 04/18/2018

1,417 Reputation

                                      9 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       Cal Poly, Team S16-G3, Livingston Spring 2018                        

                                                  Member of Cal Poly, Team S16-G3, Livingston Spring 2018 



                    CPSU-LIVINGSTON-S18S16G3                     


                                            4 Members                     


                                            9 Guides authored                     

Wahyudi Hussaini - Sep 30, 2020

Reply

magnificent…i successfully change a new battery for xperia xa1 ultra…its not the time yet for this xperia to retire from service to me…thank you very much

very Green - Jun 19, 2021

Wher did you get the batterry from? And is it good as the original?

very Green - Jun 19, 2021

Reply

Where can I get the original battery