Difficulty
Moderate
Steps
4
Time Required
Suggest a time??
Sections
1
- SIM and SD card reader
- 4 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackSony XPERIA Tablet Z
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Removing cover
- Tools you will need is the Phillips #00 precision screwdriver, Plastic Opening Tools, and tweezers.
- Insert plastic opening tool in the corner of device and slide along edges to separate adhesive
- Remove cover
Tools you will need is the Phillips #00 precision screwdriver, Plastic Opening Tools, and tweezers.
Insert plastic opening tool in the corner of device and slide along edges to separate adhesive
Remove cover
1024
Step 2
locating the SD card reader
- Locate the SD card reader in the bottom left hand corner
- Remove all screws connecting the metal plate to the device.
Locate the SD card reader in the bottom left hand corner
Remove all screws connecting the metal plate to the device.
Step 3
Lift up
- After all the screws have been removed lift the circuit board up to wiggle free.
After all the screws have been removed lift the circuit board up to wiggle free.
Step 4
Disconnecting electrical tape.
- After Wiggled free place the tweezers on the piece of electrical tape connecting it to the device.
- Once placed there lift up and disconnect the SD card reader from the device.
After Wiggled free place the tweezers on the piece of electrical tape connecting it to the device.
Once placed there lift up and disconnect the SD card reader from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Martin Luna
Member since: 09/24/2014
1,804 Reputation
5 Guides authored
Badges:
10
+7 more badges
Team
USF Tampa, Team 15-6, Remmell Fall 2014
Member of USF Tampa, Team 15-6, Remmell Fall 2014
USFT-REMMELL-F14S15G6
3 Members
6 Guides authored
Steve Donnelly - Jun 26, 2019
Reply
How long did it take to complete???