Difficulty
Moderate
Steps
3
Time Required
Suggest a time??
Sections
1
- Front and Rear Facing Cameras
- 3 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackSony XPERIA Tablet Z
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Remove the back cover
- Tools you will need is the Phillips #00 precision screwdriver, Plastic Opening Tools, and tweezers.
- Insert plastic opening tool in the corner of device and slide along edges to separate adhesive.
- Remove cover
Tools you will need is the Phillips #00 precision screwdriver, Plastic Opening Tools, and tweezers.
Insert plastic opening tool in the corner of device and slide along edges to separate adhesive.
Remove cover
1024
Step 2
- Remove tape connecting front camera to motherboard and then disconnect the camera from the port.
- Lift the camera from the right and simply wiggle out of the slot.
Remove tape connecting front camera to motherboard and then disconnect the camera from the port.
Lift the camera from the right and simply wiggle out of the slot.
Step 3
- Disconnect the back camera from the port located in the upper right corner.
- Lift up the camera cable using the tweezers.
- Wiggle out camera from the slot.
Disconnect the back camera from the port located in the upper right corner.
Lift up the camera cable using the tweezers.
Wiggle out camera from the slot.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Martin Luna
Member since: 09/24/2014
1,804 Reputation
5 Guides authored
Badges:
10
+7 more badges
Team
USF Tampa, Team 15-6, Remmell Fall 2014
Member of USF Tampa, Team 15-6, Remmell Fall 2014
USFT-REMMELL-F14S15G6
3 Members
6 Guides authored