Difficulty

Easy

Steps

6

Time Required

                          5 minutes

Sections

3

  • Rear Case
  • 2 steps
  • Midframe
  • 2 steps
  • Headphone Jack
  • 2 steps

Flags

0

  • BackSony Xperia T2 Ultra Dual

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Rear Case
  • Using the spudger, pry open the back cover by starting alongside the edge of the back cover.

Using the spudger, pry open the back cover by starting alongside the edge of the back cover.

1024

Step 2

  • Once the part of the back cover has been opened up. Slide the spudger to pry completely detach the cover from the phone.

Once the part of the back cover has been opened up. Slide the spudger to pry completely detach the cover from the phone.

Step 3

              Removing the internal cover
  • Using the Phillips #00 Precision screwdriver, take out 8 silver screws (3.15mm) and 5 gold screws (3.9mm) for a total of all the screws attached to the flat plate. 3 of the gold screws are located at the top of the phone and the other 2 screws are located at the bottom of the phone.

Using the Phillips #00 Precision screwdriver, take out 8 silver screws (3.15mm) and 5 gold screws (3.9mm) for a total of all the screws attached to the flat plate. 3 of the gold screws are located at the top of the phone and the other 2 screws are located at the bottom of the phone.

Step 4

  • To remove the internal cover, use the plastic spudger tool and pry the cover from the phone as shown in the picture.

To remove the internal cover, use the plastic spudger tool and pry the cover from the phone as shown in the picture.

Step 5

              Removing chip
  • Using tweezer, locate the audio jack as shown and pull out the chip connected to the motherboard.

Using tweezer, locate the audio jack as shown and pull out the chip connected to the motherboard.

Step 6

              Remove audio jack
  • Carefully remove the audio jack by using the tweezers and pull firmly straight out of the motherboard.

Carefully remove the audio jack by using the tweezers and pull firmly straight out of the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 3 other contributors 


                    Christina Wojaczyk

Member since: 09/26/2014

1,450 Reputation

                                      7 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       USF Tampa, Team 13-3, Staggers Fall 2014                        

                                                  Member of USF Tampa, Team 13-3, Staggers Fall 2014 



                    USFT-STAGGERS-F14S13G3                     


                                            3 Members                     


                                            7 Guides authored