Difficulty
Moderate
Steps
8
Time Required
20 minutes
Sections
1
- Speaker
- 8 steps
Flags
0
BackSony Xperia Sola
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Speaker
- Lay the phone as shown and put the camera facing up.
Lay the phone as shown and put the camera facing up.
1024
Step 2
- Push the back cover as shown, then lift the cover off.
Push the back cover as shown, then lift the cover off.
Step 3
- Remove the five screws as shown on the phone by using 26 Bit Kit.
- Use a T6 screwdriver bit to remove top two screws.
- Use a J000 screwdriver bit to remove the bottom two screws.
- Use a T3 screwdriver bit to remove the middle screw (close to camera).
Remove the five screws as shown on the phone by using 26 Bit Kit.
Use a T6 screwdriver bit to remove top two screws.
Use a J000 screwdriver bit to remove the bottom two screws.
Use a T3 screwdriver bit to remove the middle screw (close to camera).
Step 4
- Use plastic opening tool to remove the bottom white cover as shown.
Use plastic opening tool to remove the bottom white cover as shown.
Step 5
- There are two additional screws under the bottom white cover as shown.
- Use T3 drivers to remove two additional screws as shown.
There are two additional screws under the bottom white cover as shown.
Use T3 drivers to remove two additional screws as shown.
Step 6
- Using plastic opening tool, lift to remove the small black cover on the bottom left of phone as shown.
- Then, using tweezers to lift the connector straight up to disconnect the battery’s circuit as shown.
Using plastic opening tool, lift to remove the small black cover on the bottom left of phone as shown.
Then, using tweezers to lift the connector straight up to disconnect the battery’s circuit as shown.
Step 7
- Turn the phone onto its side and insert a flat object and gently remove cover, using plastic opening tool as shown.
Turn the phone onto its side and insert a flat object and gently remove cover, using plastic opening tool as shown.
Step 8
- Flip over the black back cover and locate the speaker phone at the bottom, then use the tweezers to remove the speaker. It is glued to the back cover so a little force will be needed.
Flip over the black back cover and locate the speaker phone at the bottom, then use the tweezers to remove the speaker. It is glued to the back cover so a little force will be needed.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 4 other contributors
Bo Wu
Member since: 02/15/2017
292 Reputation
2 Guides authored
Badges:
9
+6 more badges
Team
USF Tampa, Team S5-G3, Lacy Spring 2017
Member of USF Tampa, Team S5-G3, Lacy Spring 2017
USFT-LACY-S17S5G3
3 Members
2 Guides authored